Tenders Are Invited For Building Construction Work – Construction Of A Biomass Combustion And Biogas Processing Plant At The Weißenfels Compost Plant Lot 3: Building Construction For A Biomass Combustion System

Building Construction Work – Construction Of A Biomass Combustion And Biogas Processing Plant At The Weißenfels Compost Plant Lot 3: Building Construction For A Biomass Combustion System. Lot 3: Building Construction For Biomass Combustion Plant ------------------------------------------ ---------------------- The Details Can Be Found In The Service Description Attached As Appendix 1. Construction Data: External Dimensions: Width Approx. 19.00 M, Length Approx. 20, 00 M Building Height Max. Height: 10.40 M Ok Ridge (Pent Roof) Min. Height: 9.36 M Ok Eaves (Pent Roof) Height Of Chimney: 18.00 M Foundation: In Accordance With Subsoil Technical And Static Specifications, Taking Into Account The Requirements From The Plans (Appendix 5) Base: Reinforced Concrete Floor Slab Concrete Quality Or Slab Thickness According To Static Requirements. The Reinforced Concrete Floor Slab With Hard Material Of Hard Material Group A Should Be Smoothed Using A Power Trowel. Required Evenness: +- 3 Mm Per 1.50 M Built-In Parts Must Be Concreted In According To Appendix 5 - Breakthrough Planning Hls. Taking Into Account The Surface Loads According To The Hls Breakthrough Planning - Weight Information From The Bmfa Plan Supplements (See Appendix 5). Execution Of The Base In Two Concreting Stages. Wall Input Storage: Rear Wall North-East: Approx. 6.00 M X 3.50 M (L X H) Designed As A Wooden Plank Wall With U-Profiles Anchored To The Side Walls, From A Height Of 1.00 M Above The Gok Of The Moving Floor Side Wall North-West: Approx . 9.60 M X 4.50 M (L X H) Southeast Side Wall: Approx. 12.60 M X 7.70 M (L X H) (F90) Concrete Base Wall: Northwest Side: Approx. 37.30 M X 0.50 M (L X H) Northeast Side: Approx. 16.40 M X 1.50 M (L X H) Southeast Side: Approx. 8.00 M X 1 .50 M (L X H) Southwest Side: Approx. 10.80 M X 1.50 M (L X H) Facade: Trapezoidal Sheet Metal Cladding With Steel Substructure Construction: Supporting Structure Made Of Steel Or Reinforced Concrete Of The Contractors Choice On Reinforced Concrete Walls In Accordance With The Statics To Be Submitted, Trusses In Accordance With The Statics To Be Submitted, Maximum Height: 1.0 M Load-Bearing And Bracing Components Of The Storage Bunker Roof: Trapezoidal Sheet Metal Cladding With Insulation To Prevent Condensation Formation If Necessary, With A Surrounding Parapet . Incline Approx. 3° Smoke Extraction System, Version With Manual Opening Via Electric Drive For Ventilation And As Pressure Relief Areas: Effective Opening Area 12 M². The Roof Can Be Accessed For Inspection, Maintenance And Repairs. A Rope System And A Roof Access Ladder Must Be Provided On The Roof. Gate: 1 Roller Door On The Southeast Side: 3.50 M X 5.00 M (W X H) Doors: 3 External Doors As Escape Doors, Clear Height 2.125 M 1 Internal Door, Clear Height 2.125 M In T90 1 Internal Door, Clear Height 2.125 M In T90 Access Stairs: External Access Stairs Lightning Protection: External Lightning Protection Devices, Lightning Protection Class Ii Der The Scope Of The Present Tender Bmfa Hochbau Essentially Includes The Following Components: - Construction Site Equipment - Reinforced Concrete Work, - Implementation Planning Of The Hall Support Structure - Delivery, Manufacture And Assembly Of The Steel Structure For The Hall Support Structure - Execution Planning, Delivery And Assembly Of The Facades And The Insulated Roof - Execution Planning, Delivery And Assembly Of The Rooflight Strips With Partially Integrated Rwas - Implementation Planning, Delivery And Installation Of The Gates And T