Bids Are Invited For Acquisition Of Furniture Intended For The Assembly Of The “Physical Core Of The Living Urban Laboratory Of Vitória

Low Wardrobe 4 Doors 1400X500x730mm [+/-5Mm]: Wardrobe With Four Divisions, Each Of Them With One Door, Equipped With A Lock, Totaling Four Locks In The Wardrobe. Each Compartment Must Be Locked Individually. Cabinet Body Made Of Particleboard Wood With Phenolic Resin And Fine-Grained Particles, 18Mm Thick, Covered With Low-Pressure Melamine Laminate, Resistant To Abrasion, Topped With Polystyrene Tape With A Visible Textured Surface, 0.45Mm Thick, With High Resistance Impacts. Doors In Particleboard Wood With Phenolic Resin And Fine-Grained Particles, Covered With Low-Pressure Melamine Laminate On Both Sides, Topped With Polystyrene Tape With A Visible Textured Surface, 1.0 Mm Thick And Highly Resistant To Impacts. Mug Type Hinge Diameter 35 Mm For Cabinet Doors, Made Of High Resistance Steel, Automatic, With Silent System Technology, Which Allows Smooth Closing Of The Door Through A System With Hydraulic Micro Piston, With Shock Absorber Integrated Into The Hinge. Mounting System With Click Wedge, Avoiding The Use Of Screws. Free Horizontal Adjustment And Integrated Lateral Adjustment, With Opening Angle Of 105 For Full Coverage Doors, With Damping And Internal Housing System In Wood With Nickel-Plated Finish. Features Fitted Finish Coverage For Body And Mug. Fastening To The Furniture Using Wood Screws. Door Locking System With Internal Stop On The Left Door, Fixed Using Self-Cutting Screws For Wood, And With Front Lock And Key For The Right Door With An Internal Core In High-Torque Resistance Steel, With An External Protective Plastic Cover In Polyethylene Injected With A Retractable System To Adapt To The Furniture If It Is Not Removed. Recessed Handle System Injected Into Rectangular Shaped Abs With Ergonomic Spokes In Silver Color. Air Shelf, Flying Drawer 2 Drawers 1 Drawer 330X500x627mm [+/-5Mm]. Drawer Body Made Of Particleboard Wood With Phenolic Resin And Fine Granulometric Particles, 18Mm Thick And 6Mm Bottom, Headed With Polystyrene Tape With Visible Textured Surface Of 0.45Mm Thickness With High Impact Resistance. Top In The Same Material, But 25Mm Thick, Polystyrene Tape With A Visible Textured Surface, 2.0Mm Thick. Drawer Set In Agglomerated Wood With Phenolic Resin And Fine Granulometric Particles, Meeting Current Norms For Formaldehyde Emission Levels, With Front, Sides And Back In 18 Mm Thickness, Average Density Of 600 Kg/M , Coated With Low Pressure Melamine Laminate On Both Sides, Resistant To Abrasion. For The Drawer, Edges Topped With Polystyrene Tape With A Visible Surface Textured With A Thickness Of 0.45 Mm On The Body And 1 Mm On The Front Of The Drawer, With High Resistance To Impacts And Base Of The Drawer In 3-Inch Wood Fiber Sheet , 2 Mm Thick With Melamine Coating On The Upper Surface. Drawer Locking System Using A Traction-Resistant Aluminum Rod With Front Activation Through A Lock With An Internal Key With An External Protective Plastic Cover Made Of Injected Polyethylene And A Retractable System To Adapt To The Furniture If It Is Not Removed. Smaller Drawer Slide Made Of Sae 1020 Laminated Steel With Smooth Sliding Through Roller