Bids Are Invited For Price Registration For Eventual And Future Acquisition And Installation Of Permanent Equipment And Furniture, In Order To Meet The Demands Of The Municipal Management Of Administration And Finance, Municipal Management Of Social Assistance, Municipal Health Management, Municipal Management Of Education, Sport, Culture And Leisure, Municipal Management Of Agriculture And Economic Development, As Well As Municipal Management Infrastructure And Public Services.

All-In-One Computer1. Processor1.1. Referential Standardization: Intel Core I7 Processor, 13Th Generation Or Higher. 1.2. Must Have At Least 8 Cores. 1.3. Minimum Frequency Of 2.9 Ghz And Cache Of 12 Mb Or Higher, Proven By The Manufacturer. 1.4. Technology That Allows Automatic Increase Of Operating Frequency In Demand Situations, As Long As It Is Within The Nominal Temperature And Performance Limits. 1.5. Must Have Integrated Memory And Graphics Controllers.2. Motherboard2.1. Manufactured Exclusively For The Model Offered. Oem Solutions Or Customizations Will Not Be Accepted. 2.2. Minimum Of 4 Usb 3.1 Ports, 1 Of Which Is Type-C, With At Least Two Ports Located On The Side Of The Equipment. No Hubs Or Adapters Will Be Accepted. 2.3. Integrated Tpm 2.0 Security Subsystem, According To Tcg Standard. 2.4. Sd Card Reader Integrated Into The Case. Adapters Will Not Be Accepted. 2.5. Camera Integrated Into The Cabinet With 2.0 Mp, Fhd (1080P) Resolution. External Solutions Will Not Be Accepted. 2.6. Remote Access Via Hardware, With Support For Viewing The Bios And Operating System Screens, In Addition To Keyboard And Mouse Control Via Tcp/Ip. 2.7. Compatibility With 802.1X Secure Networks. 2.8. Support For Remote Installation Of Operating Systems. 2.9. Remote Management With Authentication Via Kerberos. 2.10. Integrated Solution For Erasing Storage Data As Per Nist Sp800-88. 2.11. Bios According To Nist 800-147 Or Iso/Iec 19678 Standards, Using Robust Integrity Verification Methods.3. Bios3.1. It Must Be From The Same Manufacturer As The Equipment. 3.2. Must Contain The Equipment Serial Number And Editable Field For Customized Identification. 3.3. Support For Access And Administrator Passwords. 3.4. Supported Languages: Portuguese Or English. 3.5. Compatible With Uefi 2.1 Specification, Proven By Official Uefi Website. 3.6. Integrated Diagnostic Software For Component Testing With Basic And Advanced Options, Including Execution Via Uefi.4. Ram4.1 Memory. 16 Gb Capacity, Type Ddr4 (2666 Mhz)., Table For Computer Laboratory: Structure Material: Base In Carbon Steel Tube Round Section Ø38.1Mm (±0.2Mm) With Wall Of 1.5Mm (±0.2 Mm), Uprights In Carbon Steel Tube With An Oblong Section Of 29Mm X 58Mm (±0.2Mm), French Hand Type Top Support Made Of 1.9Mm Thick Carbon Steel Sheet And Wire Gutter Made Of 1.08Mm Thick Carbon Steel Sheet (±0.1Mm). Tube Forming Process: Cold Forming Free Of Visible Wrinkles And Wrinkles. Welding System: Spatter-Free Mig, Must Have A Smooth And Homogeneous Surface, Must Not Present Sharp Points, Rough Surface Or Slag. Pre-Treatment: Anti-Rust That Ensures Resistance To Corrosion In A Salt Spray Chamber For At Least 500 Hours (Degreasing And Nanotechnology Process Using Fluorzirconium, Which Guarantee Great Mechanical Resistance And An Excellent Finish). Painting: Hybrid Electrostatic Epoxy/Polyester Powder With Oven Polymerization, Contains Antimicrobial Agent And Free Of Heavy Metals, With Minimum Film Of 100 Microns. Tips: Polypropylene Tip With Internal Diameter Of Ø38.5Mm) With Initial Thickness Of 2Mm (±0.2Mm) And Wall Thickness In Contact With The Floor Of 6.8Mm (±0.5Mm), Locked By Pin On The Part Bottom Ø9x20(±1)Mm High Density Polyethylene. Foot Protection: Injected In Polypropylene With A Length Of 245Mm (±5Mm) With A Thickness Of 2.6Mm (±0.2Mm). Fixed To The Structure By