Bids Are Invited For Acquisition Of A Hydraulic Weeder (As Per Proposal Nº045993/2023 From The Ministry Of Integration And Regional Development), To Meet The Needs Of The Municipal Transport Secretariat.

Hydraulic Weeder Minimum Specifications. Coupling On The Right Side Of The Tractor With A ¾” (19Mm) Thick Steel Plate, Bolted On. Chassis With A ¼” (6.35Mm) Plate In A Joined And Welded Profile. .Two Hydraulic Cylinders 2. ½” Diameter With 30Mm Diameter Shank. Cylinders Coupled To The Arm For Lifting And Adjusting The Head.Brush Flange Of At Least 500Mm In Original Diameter With Steel Bristles ¾” (19Mm) In Diameter And Length Of 350Mm, Screwed To The Flange.Working Diameter Of Approximately 650Mm Of The Brush Transmission Shaft.Motor Hydraulic Omh200 Coupled Directly On The Shaft. Multiplier Pump Coupled Directly On The Tractors Power Take-Off. Independent Triple Control, With Two Double Steel Levers (For Cylinders) And A Trigger Lever (For The Engine). 70 Liters Of Hydraulic Oil 100.With Hydraulic Cooling System And Oil Filter.Hoses 5/8, ½, 3/8 And ¾, All Hoses Are In 2 Steel Webs With Jic Type Pressed Connections.Articulation System With Retraction Spring On The Lift Cylinder.Coupling On Solis Tractor. Shipping, Technical Delivery And Training Included., Steel Cable Brushes For Hydraulic Weeder Contains 32 Steel Cables (Steel Core Steel Cable Of 19Mm In Diameter And 350Mm In Length Each).