Bids Are Invited For Formation Of Price Registration For Future And Eventual Hiring Of A Company Specialized In The Supply Of Permanent Materials (Furniture) To Meet The Needs Of The Municipal Government Of Bom Jesus Das Selvas/Ma

Steel Cabinet (1.98M Epoxy-Powder Paint. 04 Shelf: In Black Plate No. 26, Measuring 0.40M X 0.90M, With Oblong Reinforcement, Electrostatic Painting With Epoxy-Powder Paint. Deliver Along With The Price Proposal, The Original Or Certified Copy Of Technical Compliance Reports Issued By A Laboratory, Complying With Technical Standards Nbr 8094 And Nbr 8095 Of The Abnt, Ensuring That The Manufacturers Products Are Resistant To Corrosion In A Salt Spray Chamber And Saturated Humid Atmosphere For At Least 300 Hours. 60M X 0.80M X 0.35M): On Black Plate No. 26, 60M 03 Shelf: In Black Plate No. 26, 35M With Lock, Structure With Anti-Rust Treatment (Phosphating), Chair With Side Clipboard.•School Chair With Side Clipboard For Right-Handed Or Left-Handed People Made Of Abs Thermoplastic Resin, Capable Of Holding A Sheet Of A4 Paper Horizontally/Vertically Being Attached To The Chair And Fixed Using 05 Invisible Self-Tapping Screws, Equipped With A Pencil Holder In A Vertical Position With The Capacity To Store 5 Pencils Or Pens. Clipboard Measuring: 56Cm Approximately 20 Liters.•Retractable Backpack Holder Made Of Polypropylene.•Seat And Back, Made Of Virgin Plastic Resin, Manufactured Using The Thermoplastic Injection Process. Seat Measuring 400Mm Wide By 460Mm Deep, With A Minimum Thickness Of 4Mm, Fixed By Screws. The Chair Loading, With Injected Brand Fixed By Screws, (+/-5Mm).•Reinforced Structure In One Piece With Feet And 02 Side Columns In Plastic Material, Preventing Corrosion And Wear, Each Column Is Formed By Two Parallel Bases With A Thickness Of 8.5Mm And A Perpendicular With A Thickness Of 11Mm, With Housing For Passage Of The Connecting Tube With The Seat, 125Mm Deep And 3Mm Thick. Fixing The Columns To The Tube In A Unique And Invisible Way Using A Threaded Metal Pin. • Feet With A Minimum Thickness Of 5 Mm And Containing At Least 2 Fins On The Smaller Base And 3 Fins On The Larger Base With A Thickness Of 2.5 Mm For Reinforcement. At Its Ends Containing Tips For Protection, Measuring 160Mm X 45Mm And 75Mm X 45Mm. Foot Measurement 480Mm X 40Mm To 45Mm At The Ends. An Oblong Horizontal Reinforcement Bar Measuring 16Mm University Type School Desk In Polypropylene: Desk With Seat And Back In Polypropylene. Backrest: Anatomically Shaped Polypropylene. Measurements: Width 400 Mm, Height 200 Mm, Allowing Tolerance Of Up To +/- 2 Mm For Width And Length, Fixed To The Structure Using 4 Aluminum Rivets. Seat: In Fo Polypropylene