Request For Quotation Purchase Of Medicines And Medical Products

Titanium Ventilation Shunts, Internal Diameter 1.27 Mm, Stainless Steel Arc Steel Rectangular 0.14X 0.25 In. Stainless Steel (Steel) Rectangular Arch - A Standard In Orthodontics, An Arch With A Round Cross-Section, A Natural Shape Made Of High-Quality Aisi 300 Steel., Arches Niti Super Elastic Square, 0.20 Upper And Lower Jaw. Arc For Braces Orthodontic Niti, In A Package Of 10 Pieces, Different Sizes, Plastic For The Manufacture Of Orthodontic Appliances Redont-Color. It Is Used In Orthopedic Stomatology For The Manufacture Of Orthodontic And Orthopedic Devices, As Well As For Rebasing And Repair Of Dentures. Redont-Color Is A Plastic Of Cold Polymerization Based On A Copolymer Of The Acrylic Group, Colorless (Or Transparent Plastic Painted In Red, Yellow, Blue) Powder-Liquid Type. The Plastic Combines Well With Basic Materials (Ftorax, Etacryl-02, Colorless Plastic For The Bases Of Prostheses), As Well As With Protacryl-M And Redont-03 Plastics, Has High Technological Efficiency In Work. Manufacture Of Orthodontic Appliances (Colorless Or Colored To Improve Appearance), Charisma For Light Reflection (8 Syringes). Sealing Material. Light-Reflecting Radiopaque Hybrid Composite Consisting Of Submicron-Sized Particles. It Is Intended For Restoration With Natural Shades With Adhesive Fixation. This Material Is Suitable For The Restoration Of Both Front And Side Teeth, Ecg Paper Nihon Kohden, Size 210*295*250, Dental Applicators. (1000X1000). Microapplicators No. 4 Regular 4 Tubes Of 100 Pcs., Green + Orange. Category: Microapplicators (Microbrushes) Euronda #4 Regular Dental Applicators (Microbrushes) Are Intended For Applying Bonding Systems, Etching Dental Gels, Liquid Materials. Characteristics: Economical And Convenient Introduction (Application) Of Stomatological Materials, They Do Not Absorb Liquids, Solutions, Varnishes Completely Giving Away During Application. The Variable Angle Of The Tip Allows You To Apply The Material Even In The Most Difficult-To-Reach Places. The Possibility Of Changing The Length Of The Applicator Handle (If Necessary, You Need To Reduce The Length Of The Handle By Easily Breaking Off The Lower Part) Convenient Dispenser Lid (The Package Can Be Easily Opened/Closed By Simply Turning The Lid) They Exclude Cross-Infection. Color Marking. Sizes: Length 102 Mm Head Diameter-2.0 Mm., Sealing Material Filtek Z250 Is A Universal Light-Curing Microhybrid Composite Sealing Material Produced By Zm Espe. Composite From The Espe Filtek Family. The Filtek Z250 Set Consists Of: 8 Syringes (4 G Each) A1, A2, A3, A3, 5, B3, C2, D3, Ud, 1 Vial With Adper Single Bond 2 Adhesive (6 Ml), 1 Syringe (3 Ml) Of Etching Scotchbond Gel, 1 Trial Set Of Sof-Lex Discs, Accessories, Shade Scale. Unlike Microhybrid Composites Of Previous Generations, Filtek Z250 Contains A Large Number Of Smaller Particles. The Material Is Easily Modeled Thanks To Its Exceptional Elasticity, While It Is Dense Enough To Ensure An Optimal Edge Fit, Solid Air Duct. Disposable Air Duct Size 000(3.5) Pink, The Ligature Wire In A 20X20 Bobbin Is Intended For Splinting In Case Of Jaw Fractures And For The Correction Of Maxillofacial Deformities. The Ligature Wire Can Be Made Of Various Metals: Steel, Aluminum-Beryllium Or Bronze-Aluminum Alloys, Silver., Buccal Tube For 1 Molar. Tubes Of Locks Are Single For 1 Molar (Pack*4Pcs), Kavysil 50 Gr. Pasty Material For Temporary Sealing, Dental Diamond Burs, Sizes 14, 16, 18. Ball Diamond Burs On A Long Leg No. 10. Tip Type: Turbine, Wire Ligature In A 20X25 Bobbin Is Intended For Splinting In Case Of Jaw Fractures And For The Correction Of Maxillofacial Deformities. The Ligature Wire Can Be Made Of Various Metals: Steel, Aluminum-Beryllium Or Bronze-Aluminum Alloys, Silver., Splenomass. Upyn Is An Alginate Impression Material Used In Dental Practice And Orthodontics. Kneading Time: 30 Seconds. Processing Time: 2:00 Minutes At A Temperature Of 23*C (Including Mixing Time) Hardening Time: 2:30 Minutes At A Temperature Of 23*C (Including Mixing Time). Disinfection: In A Disinfecting Solution, For Example Iodisol. Diluted In A Ratio Of 1:10 (30 Seconds) After Washing With Water. Storage Of The Impression: It Is Recommended To Fill The Impression With Plaster Immediately After Its Receipt, It Can Be Stored For A Maximum Of 4 Hours In An Environment With 100% Humidity. Molding Mass: Gypsum (Marble, Convertin, Hard). Warning: For The Preparation Of Alginate Impression Mass, It Is Recommended To Use Distilled Water Or Demineralized Water At A Temperature Of About 23*С. In The Case Of Increased Temperature Or Water Hardness, The Processing Time And The Hardening Time Are Reduced. Packaging: 800 G In A Plastic Container.