Tenders Are Invited For Salt Spreaders – Framework Agreement For The Delivery Of Roll-Off Spreaders On Roll-Off Tipper Frames (13 To 16 Pieces)

Salt Spreaders – Framework Agreement For The Delivery Of Roll-Off Spreaders On Roll-Off Tipper Frames (13 To 16 Pieces). Swap Charger System 1570 According To Din 30722; Suitable For Ark Systems According To Din 30722; The Connections Are To Be Installed Side By Side On The Right Side Of The Subframe Of The Body In The Direction Of Travel. Multi-Coupling Fixed Sockets (Plug) Dn 12 With The Following Properties: Number Of Connections: 2, With Integrated Pressure Compensation, Dust Protection Cap With Safety Rope Or Chain, Operating Pressure Min. 300 Bar, Temperature Range Of The Oil -30° C To 100° C, Collecting Container Below The Hydraulic Connections, Parking Station To Be Supplied. It Must Be Possible To Roll Up And Down The Spreader Even When Loaded. The Height Of The Vehicle Including The Body Must Not Exceed 3500 Mm. Thawing Substances: Rock Salt, Wet Salt, Brine. Dulling Substance: Grit. A Belt Conveyor Is Desired. If A Belt Conveyor System Is Offered, It Must Have The Following Properties: Grit Pressure Relief For The Belt, Movable Cover Of The Conveyor Belt, Suspended On Chains And Grit Container As An All-Steel Construction, Protected Against Corrosion. Spreader Capacity Of At Least 4000 L; Access Ladder And Platform With Handrail In A Sure-Footed Design; Cover Sieve For The Grit Container, Foldable Lengthwise (And Also In The Middle On Each Side), Can Hold At Least 90 Kg; Designed As Hot-Dip Galvanized Steel Gratings With Envelope Protection; Folding Roof, Standard Frame With Lever And Tarpaulin, Folds Up When Opened (4 Longitudinal Beams Over Containers With Connection To The Frame, 2 Locking Hooks With Rope Opening. To Prevent Opening Due To The Wind); Stand Emptying Without A Brine Pump, Only With The Spreading Device Folded Up; Automatic Adjustment Of The Metering Roller For Quick Emptying For Accelerated Emptying Of The Grit Container; Stationary Emptying, Max. 15 Min; Automatic Switchover To Dry Salt If The Wet Salt System Fails; Filling And Emptying Of The Brine Tank Using A Dry Coupling Filling Connection Made Of Stainless Steel. Operating Hours Counter On The Spreader. Automatic Reduction Of The Amount Of Dry Salt When The Brine Is Switched On. The Chassis Must Be Equipped With A Suitable Corrosion-Free Cover So That The Chassis Is Protected As Best As Possible Against Falling Salt, Grit And Brine. Assembly Using Chains. Version In 24 V; Cables Should Only Be Routed From Below In Switch Boxes; Protection Class Min. Ip 66; Diagnostic Interface; Possibility Of Emergency Operation According To Din En 15597; Operational Data Capture Including Memory Card, It Using The Supplied; Software With Rs 232 Interface; Container Volume Min. 6000L; Optical Level Indicator; Internal Tank Ventilation; C Connection With Stopcock For The Possibility Of Cleaning And Rinsing The Brine Lines - Hoses, Pipes, Nozzles And Filters With Water; It Must Be Ensured That The Drain Is Always Emptied Evenly During Wet And Spray Use. Fluid Delivery Depending On Driving Speed, Str