Tenders Are Invited For Construction Of Road Lighting In The Town Of Pieszcz

3.1. The Subject Of The Order Is The Implementation Of The Investment Task Entitled: Construction Of Road Lighting In The Town Of Pieszcz.3.2. The Scope Of Works Includes The Construction Of Road Lighting In The Pieszcz Commune. Postomino On Plots No. 7/14, 47, 61, 84, 222, 237, 238, 247.3.3. The Lighting Should Be Connected To: - For Plot 47 - The Designed Measuring Cabinet On The Pole Of The Lv Overhead Line No. 306, Located On The Border Of Plots 41 And 42, Which Will Be Powered With A 0.4Kv Cable With A Cross-Section Of 4*35Mm2 From The Above-Mentioned Lv Line, In Accordance With The Connection Conditions No. P/23/045465 Of July 11, 2023, - For Plot 222 - The Designed Measuring Cabinet On Pole Of The Nn Overhead Line No. 403/1, Located On The Border Of Plots 193 And 195, Which Will Be Powered By A 4*35Mm2 Cable From The Above-Mentioned Lv Line, In Accordance With The Connection Conditions No. P/23/045467 Of July 11, 2023.3.4. The Task Should Include The Following, In Accordance With The Design Documentation: 1) 2 New Measurement Systems And So Type Street Lighting Cabinets, Which Are Intended To Control Road Lighting In A 3-Phase Power Network. The Cabinets Should Be Installed Next To The Pole Of The Lv Overhead Line No. 403/1, Located On The Border Of Plots 193 And 195 And At The Pole Of The Low Voltage Overhead Line No. 306 Located On The Border Of Plots No. 41, 42 And 47;2) 5 Sections Of Cable Lighting 4*35Mm2, Which Should Be Led Out From The Designed So1 And So2 Lighting Cabinets, Along With The Cable Line, Galvanized Steel Hoop 25*4Mm Should Be Laid With A Total Length Of Approximately 3737M; Lay All Circuits In The Trench Along With Protective Pipes And Passages Under The Road Surfaces And Exits, In Accordance With The Pzt;3) 64 Pcs. Lighting Poles And Fixtures In Accordance With The Design Documentation (Galvanized Steel Lighting Poles H = 8 M With A 1.0 M Long Boom With End Diameter 60Mm, Inclination Angle 10 Degrees, Pole Diameter 160Mm Including With A Dedicated Prefabricated Concrete Foundation). The Lighting Fixtures Are To Be Equipped With A Zhaga Connector And The Possibility Of Power Reduction At Specific Hours; 4) Installation And Connection Of An Astronomical Clock (2 Pcs.) Controlling The Operation Of Each Lighting Cabinet; 5) Construction Works In The Electrical Industry (In Accordance With The Annex To The Construction Design: Copy Of The Meeting Minutes Coordination Of April 23, 2024), Including: A) Lighting Fixtures In Conflict With Dismantle The Designed Lighting Together With The Booms And Hand It Over To Dru Słupsk In A Non-Deteriorated Condition - 19 Pcs. B) Dismantle The Overhead Line Supplying The Luminaires In Question And Hand It Over To Dru Słupsk With Confirmation Of Receipt. The Detailed Scope Of The Network To Be Dismantled Should Be Determined At Dru Słupsk Before Commencing The Work. C) The Poles Of The Separate Overhead Network Constituting The Substructure Of The Dismantled Overhead Network Should Be Dis