Bids Are Invited For Future Acquisition Of Hydraulic Materials In Cast Iron, Ductile Iron, Aluminum And Stainless Steel, According To The Conditions And Requirements Established In This Instrument.

Stainless Steel Repair Clamp Dn 250Mm /Range:260X 272= L 300Mm - Component: Steel Sheet/Cast/Insulation Rubber/Screw/Nut/Washer/Pint A/Nominal Pressure - Material: Stainless Steel Aisi 304/Ductile Iron En Gjs 500-7 (Astm A536) /Epdm/Astm A325 Steel/Epoxy/10 Kgf/Cm², Adaptation Joint Ff 200X150mm W/ Sealing Ring 66Mm Height And Joint Length 275Mm/Painting: Epoxy Preferably In Blue Color. Casting Material: Ductile Cast Iron. Surface Finish Of Fastening Elements: Hot Galvanized Screws, Nuts And Washers Inspections And Tole, Joint Ff Dn 325 X 275Mm (V33)/Painting: Epoxy Preferably Blue. Casting Material: Ductile Cast Iron. Surface Finish Of Fastening Elements: Hot Galvanized Screws, Nuts And Washers Inspections And Tolerance: Must Meet The Minimum/Maximum Measures Provided For Each, Reduction C Ring 150Mm , 10/12/2024, Register (Valve) Dn 150Mm Drawer/Head And Bb With Rubber Wedge (V72) - (Nbr 14968 Register Drawer Wedge Rubberized With Bags Jgs Dn 150-), Register (Valve) Dn 250Mm Drawer/Head Ff W/Flange, Registration (Valve) Dn 250Mm Drawer/Head Ff Je Bb (V78) - (Nbr 14968 Cast Iron Drawer Register Rubberized Wedge, Jgs Dn 250), Register With Flange Dn 100Mm Drawer/With Handwheel, Drawer Type Register/Valve, Dn-100Mm, Flanged , Pressure Class Pn-10 According To Standard Nbr-7675, Cast Iron Body And Cover, Rubber Coated Ductile Cast Iron Wedge As Per Nbr-14968, Full Passage Without Wedging Cavity, Aisi-410 Stainless Steel Rod, V Drive, Dn-75Mm, Pressure Class Pn-10 According To Standard Nbr- 7675, Te Fd Bbb Jgs Dn 200 Bbb Jei Pba Jgs 150 X 100Mm - With Rubber Ring; 110Mm, Wafer Type Butterfly Valve Dn 100Mm - With Drilling Standard According To Nbr-7675, Pressure Class Pn-10; Cast Iron Body, Aisi-304 Stainless Steel Disc And Shaft, Epdm Or Buna-N Seal Ring; With Flywheel-Driven Reduction Gear, Epdm Or Buna-N Sealing Ring; Operated By A Lever, Wafer Type Butterfly Valve Dn 200Mm - With Drilling Standard In Accordance With Nbr-7675, Wafer Type Butterfly Valve Dn 50Mm - With Drilling Standard In Accordance With Nbr-7675, Wafer Type Butterfly Valve Dn 75Mm - With Drilling Standard In Accordance With Nbr- 7675, Butterfly Valve, Drilling Standard Conforms Nbr-7675, Pressure Class Pn- 10; Cast Iron Body, Disc And Shaft In Aisi-304 Stainless Steel, Sealing Ring In Epdm Or Buna-N; With Flywheel-Driven Reduction Box, Dn-150Mm, Pressure Class Pn-10; Cast Iron Body, Dn-200Mm, Dn-300Mm, Dn-400Mm, Dn-500Mm, Dn-600Mm, Waffer Type, Waffer Type, Check Valve With Double Wafer Type Port, Construction Standard: According To Nbr-7675. Nominal Diameter: Dn-250 Mm. Length: L = 146 Mm. Working Fluid: For Treated Water. Valve Body Material: Gray Cast Iron, Or Better. Double Ports In Gray Cast Iron, O, Check Valve With Double Waffer Port, Construction Standard According To Nbr-7675, Nominal Diameter Dn-50Mm; Pressure Class Pn- 10; Seal Rings In Epdm Or Buna-N; Cast Iron Body, Aisi-304 Stainless Steel Doors, Aisi-304 Stainless Steel Shaft, Stainless Steel Spring, Valve