Bids Are Invited For Acquisition Of A Meeting Table

Composite Meeting Table, Total Width, 480X120x74 Cm 480X120x74 Cm - 03 - Tops Made Of 25 Mm Thick Mdp, Covered In Textured Low-Pressure Melamine Laminate On Both Sides, The Edge That Follows The Entire Contour Of The White Table Top Is Made Of 3 Mm Pp And In Other Colors, It Is 3 Mm Thick, Hot Glued Using The Holt-Melt System, With A Minimum Radius Of 2.5 Mm. Cutout For Socket Boxes In The Center Of The Covers. 02 – Side Feet In 30X50mm Rectangular Carbon Steel Tube On The Feet And 30X50mm Rectangular Carbon Steel Tube On The Upper Cross Member, With A Thickness Of 1.5Mm, With 700Mm Diameter, With Carbon Steel Plates With A Thickness Of 2Mm Fixed Using Mig Welding, The Plates Have Through Hole That Allows The Tops To Be Affixed Using Screws, Fastened Directly To The Wood. 06 – Stringers Made Of 30X50mm Rectangular Carbon Steel Tube, With A Thickness Of 1.06Mm, Fixed To The Side Feet Using Machine Screws Attached To Metal Bushings Riveted To The Stringers. 02 – Central Feet In 40X40mm Square Carbon Steel Tube On The Legs And 30X50mm Rectangular Carbon Steel Tube On The Top Cross, 700Mm In Height, With Carbon Steel Plates With 2Mm Thickness, The Plates Have Through Holes That Allow The Tops To Be Fixed Using Screws, Locked In Directly In Madeira. All Metallic Parts Must Receive A Pre-Treatment Using An Iron Phosphate Bath Multimetal Polyammorphous Spray And Electrostatic Powder Painting With A Layer Of 80 To 120 Microns, And Cured In An Oven At 200ºc. Metal Feet With Leveling Shoes Made Of Rigid Pvc With A Diameter Of 32 Mm, Whose Function Will Be To Overcome Any Uneven Floor Levels. 02 - Plastic Socket Box With Cutout That Allows The Inclusion Of Up To 04 Sockets, 03 Rjs And 01 Hdmi.