Bids Are Invited For Price Registration For Future And Possible Acquisition Of Electrical Materials, Destined For The Municipal City Of President Kennedy-To.

External Ballast Power, 70W, Power Factor, 0.93, Voltage, 220V, Electromagnetic Ballast With Low Losses, Operates With Sodium Vapor Technology Lamp, High Power Factor, Electrostatic Painting, Manufactured In Accordance With Abnt Nbr 13593 Standard . Present Catalago., 100W, High Sodium Vapor Lamp Pressure, Rated Power 70W, Tubular External Bulb, Standard Base E, 27, Universal Operating Position. Minimum Photometric Characteristics, Minimum Luminous Flux Of 6,500 Lumens, Measured After 100 Hours Of Operation, Color Temperature 2000K, Average Life 32,000H And Color Reproduction Index 20. Other Characteristics In Accordance With Standards Nbr Iec 662, Iec60662 And Nbr Iec 62035 , Iec 62035. Present Catalog., Nominal Power 100W, 40, Minimum Luminous Flux Of 10,500 Lumens, Iec 60662 And Nbr Iec 62035, Photoelectronic Relay For Individual Control Type Nf With Supply Voltage Between 105V And 305V, Frequency 60 Hz (Phase-Phase E Phase Neutral), Degree Of Protection Ip67 (Enclosure), Service Life: Must Reach A Minimum Of 10,000 Operating Cycles, Consumption Less Than 1.2W Measured At 220V With Nominal Load 1800Va, Switching Capacity Of 1800Va For Discharge Lamps, With Power Factor Less Than 1 (One), Fail-Off Type: (In Case Of Failure, The Load Is Switched Off), Polycarbonate Cover Stabilized Against The Effects Of Ultraviolet Radiation, High Resistance To Impacts And Atmospheric Agents. Polycarbonate Base. The Joint Between The Lid And The Base Must Be Made Using Ultrasonic Welding; Have A Comparator Circuit Capable Of Monitoring The Voltage On The Switching Contacts, Only Allowing Switching (Connection Of The Lighting Circuit) When The Potential Difference (Voltage) Is Equal To Zero, Or Close To Zero, On Said Contacts, With Deviation Maximum + Or - 800S In Relation To Zero Crossing Between Load And Mains, Connect With Lighting Level 15 Lux 25% And Shutdown At Maximum 10 Lux 25%, Shutdown Between 2 And 5 Seconds Delay, Protected Against Network Surges; It Must Have As A Sensor, A Phototransistor Or Photodiode In Encapsulated Silicon And An Electronic Activation Control, The Sensor Must Be Arranged In A Zenithal Way (Looking Up) Or Laterally; Ability To Discharge The Existing Capacitor In The Reactor (To Correct The Power Factor) In 5 Minutes To A Level Below 50V; In The Activated Condition, The Relay Must Not Present Momentary Or Permanent Failures When Subjected To Voltage Sags (Sag/Dip) Between 0.9 Pu (Per Unit) And 0.1 Pu, Lasting Between 2 To 30 Network Cycles, Pins Tinned Brass; 10-Year Warranty Against Manufacturing And/Or Operational Defects; Connection/Fixing Base And Other Features In Accordance With Norm Nbr 5123/98. Present Catalago., 05/12/2024, Arm With Shoe, Hot Galvanized Internally And Externally, In Carbon Steel Sae1010, 1020 (Society Automobile Engineering), With Or Without Seam, According To Nbr 8158 And 8159, Diameter, 48 Mm, Projection Horizontal 2,500 Mm, Wall Thickness, 2, 25 Mm, For 70W, 150W And 250W Luminaires, With Metal Strap For Fixing, As Per Drawing N.005. Present Catalog., Horizontal Projection Of 3,000 Mm, For 250W And 400W Luminaires, As Per Drawing N.006., Led Public Luminaire, Modular, Injected Or Extruded Aluminum Body, Dimmable, With 7-Pin Relay Base, Luminous Flux Minimum 12000Lm, Maximum Power 80W, 160 Lm, W, Neutral White 5000K, Optical Block Ip66, Class I, Irc?70, Voltage 20