Tenders Are Invited For Electrical Installation Work – New Building Of The State Vocational School I, Bayreuth - 3011 Building Automation Ba 1

Electrical Installation Work – New Building Of The State Vocational School I, Bayreuth - 3011 Building Automation Ba 1. The City Of Bayreuth Intends To Build A New Vocational School 1 On The Site Of The Existing Vocational School At Kerschensteiner Straße 6, 95448 Bayreuth. The Construction Site Is Located In An Inner-City Location In The East Of Bayreuth, Between A Heterogeneous Development And The East School Center. The Measure Is Divided Into Three Main Construction Steps. Ba-1 (School) Is Part Of This List Of Services. Ba-2 And Ba-3 Will Follow At A Later Date. As Part Of The Construction Of The New Building, The Low-Voltage Main Distribution And The Control Centers For All Systems Will Be Rebuilt With The Ba-1. Building Automation Is Installed In Accordance With The Guidelines For Energy-Efficient, Economical And Sustainable Construction And Renovation In Building Management. According To The Current Planning Status, Ventilation Controls, The Heating System, Sanitary Technology And Electrical Engineering Data Points Are Included In The Building Automation. Furthermore, The Building Automation Provides A System For Monitoring All Energy Flows, Time Management And User-Specific Optimization. Management And Operating Facilities The Automation Must Be Built In Such A Way That The System Constructed Is Compatible With The Existing Management And Operating Facilities Of The City Of Bayreuth. This Can Be Achieved Using The Aks (Specification Of The City Of Bayreuths Specifications) To Be Created. Automation Devices The Building Services Systems Used In New Buildings Are Predominantly Operated Via The Central Automation Level. The Field Devices Of The Individual Control And Pump Groups Of Static Heating Circuits And The Ventilation Devices Are Controlled From Here. In Addition, The Transfer Of Data Points From Other Hls Systems Is Planned (E.G. Fault Reports From The Lifting System, Energy Meter From The Pv System). A Possible Time Program And The Parameters Of The Operating States Must Be Entered Directly At The Ddc Substations Or Via The Building Automation. Individual Systems, Such As The Fresh Water Station, Dea, Decentralized Air Conditioning Units And The Wastewater Lifting System, Are Equipped With Their Own Control Devices. Here Selected Data Points Are Transferred To The Higher-Level Operating Level Via Suitable Interfaces And Protocols (Bacnet/Ip, Modbus). This Allows Fault Messages To Be Displayed, Selected Operating Parameters To Be Displayed And Changed And The Operation Of The Systems To Be Monitored. Control Cabinets The Control Cabinets Accommodate The Central Automation Systems As Well As Power And Control Groups. Here The Sensors And Actuators Are Controlled By The Ddc Installed There And All Control Functions Are Processed. Control Functions And Parameters Can Be Influenced Manually At The Local Priority Operating Level. Important System Components Can Be Switched On Or Off Directly Using The Hardware Using The Respective Switches On The Manual Control Level On The Control Cabinet. The Control Cabinets Are Freely Programmable. Automation Management The Le