Bids Are Invited For Rp - For Acquisition Of Industrial Laundry Equipment For Hospital Use.

Hospital Horizontal Washer (Environment Separation) Capacity 50Kg -. Specification: Hospital Horizontal Washer (Environment Separation) Capacity 50Kg Hospital Washer, Intended For Washing/Rinsing Clothes In General, For Hospital Use, With Two External Doors, One Facing The Clean Side And The Other Facing The Dirty Side Of The Laundry Room. Structure Made Of Sae 1020 Steel Profiles And Sheets Rigidly Interconnected Through Continuous Welding, Providing Total Stability To The Assembly With Chemical Treatment Against Corrosion And Base On High Adhesion Primer And Final Finish With Epoxy-Based Painting. External Cylinder Must Be Made Of Aisi 304 Stainless Steel Sheets. External Hinge Type Doors In Aisi 304 Stainless Steel, 18/8 Alloy. Hood For Room Separation Made Of Sae 1020 Steel, With Large Display. Inner Basket Made Of Aisi 304 Stainless Steel Sheet, With 8Mm Perforations. Transmission System With Drive Through Pulleys And V Belts, By Means Of Three-Phase Induction Electric Motor, Equipped With Overload Protection, Through Thermal Relay. Dirty Side Control Panel On The Front Of The Equipment With Thermometer For Temperature Control, Push Button To Align The Basket Door With The External Body Door, Timer To Control The Operating Time With Audio Visual Alarm At The End Of The Cycle, Audio Visual Alarm For Communication Between Operators, Open Door Indicator Lamp, General On/Off Switch, Electrically Operated Drain, Basket Positioner Buttons; Bimanual Providing Safety To Operators, Preventing The Risk Of Accidents, Clean Side Control Panel With Audio Visual Alarm To Release Unloading, Open Door Indicator Lamp. Manual Controls With Side Display For Controlling Water Level, Water And Steam Input; The Control Panel Must Be Totally Sealed, Containing Electric Control Drives With Pr, Tripod Clothes Spinner With Capacity Of 30 Kg Per Load. Designed To Remove Excess Water From Clothes. Specification: Tripod Clothes Spinner With Capacity Of 30 Kg Per Load. Designed To Remove Excess Water From Clothes. For Professional Use, As Per Features Below: Control Via Direct Start Key With On/Off Button. Tripods And Base Of The Internal Basket Made Of Sae1020 Steel, External Body Made Of Sae1020 Steel With Anti-Oxidant Base Paint And Final Finish In Epoxy Paint; Body Suspended By Chain Links, For Better Vibration Absorption. Inner Basket And Outer Lid Made Of Aisi 304 Stainless Steel; Alloy Steel Shaft Properly Dimensioned To Withstand The Efforts And Possible Overloads Requested During Operation, Drive The Basket Through A Three-Phase Induction Electric Motor, By Means Of Friction Pulleys And V Belts To Allow A Smooth And Safe Start. Control Panel Located Next To The Equipment Equipped With A Manual Start Key; Brake Through Pedal, With Pressure Distributed Through A Drum Covered With Brake Lining, Providing A Smooth And Safe Stop. Starter Key And Brake Pedal; It Must Comply With Regulatory Standard Nr12 Of The Ministry Of Labor, Which Requires Items Aimed At Greater Operator Safety, Such As: Fairings And/Or Protections That Prevent Access To The Moving Parts Of The Centrifuge, Such As Gears, Belts, Pulleys, And Motors; Equipped With A Security System With Electric Lock