Bids Are Invited For Price Registration For The Acquisition Of Hydrometers And Meters From Cisam-Sul Consortium Members, With Delivery To The Headquarters Of The Respective Consortium Entities, Which May Or May Not Reach The Total Bid, According To The Specifications, Quantities And Conditions Established In The Annexes And The Conditions Set Out In This Notice.

Magnetic Unijet Hydrometer For Cold Water, With Magnetic Transmission Class B, Nominal Diameter Of 3/4, Threaded, Length 115Mm Nominal Flow Of 1.50 M³/H, Maximum Flow Of 3.00M³/H, Dry Clockwork, Adjustable With Rotation Up To 360° E Watchmaking Tilted 45°, Reading Direct, Metal Alloy Housing With At Least 60% Copper, Without Connections. Housing: Painting Of The Housing Using The Electrostatic Process With Epoxy Paint. Filter: Must Be Supplied With A Filter Integrated Into The Meter Input, Sieve Type. Meeting The Specifications Of Metrological Class B, In Compliance With The Standards., Multijet Hydrometer For Cold Water, Nominal Diameter Of 1/2, Length 165Mm Nominal Flow Of 1 , Transition Flow 0, 120M³/H, Minimum Flow 0, 03M³/H, Orientable With Rotation Up To 360° And Tilted At 45°, With Connections, Meeting The Specifications Of Metrological Class B, In Compliance With Norms Nbr Nm 212/99 And Nbr 8194 Of Abnt And Ordinance 246 Of 17/10/ 00 From Inmetro. Note: The Nuts And Tubes Must Be Made Of Metal Or Brass And The Sealing Washers Must Be Made Of Polypropylene., Multijet Hydrometer 1 (Nominal Diameter). 260Mm Length, Direct Magnetic Transmission And Extra-Dry Watchmaking. Maximum Flow 7 M3/H. Nominal Flow 3.5 M3/H. Metrological Class B. Copper Alloy Housing With Threaded Ends According To Nbr 8133. Electrostatic Epoxy Resin Painting, Multijet Hydrometer Dn 1 (Nominal Diameter). Comp. 260Mm, Class B, Direct Magnetic Transmission And Extra-Dry Watchmaking. Qnominal 3.5M³/H, Maximum Flow 7.0 M3/H. Copper Alloy Housing With Threaded Ends According To Nbr 8133. Electrostatic Epoxy Resin Painting. Internal Mechanisms Made With Engineering Plastics, With Rectified Stainless Steel Shafts And Synthetic Sapphire Bearings. Watchmaking Tilted At 45 Degrees With Free Rotation Or 360 Degrees. Accompanied By Metal Connections., Woltman Hydrometer With Class B Horizontal Turbine, (Dn50) (Brown Tube) With Flanges, Which Meets Qmax Of 50M³/H, Prepared For Remote Reading By Reed-Switch. With Connections (Flanges, Screws, Nuts And Seal Rings), 03/12/2024