Request for Proposal for Clifton Pier Power Station - Station C Boiler House Renovations

Request for Proposal for Clifton Pier Power Station - Station C Boiler House Renovations Hard Hat § Safety Shoes § Safety Glasses § Hi-Visibility Vest 4.1 Demolition A. Remove All Existing Roof Panels And Discard In An Environmentally Responsible Manner. B. Remove All Existing Wall Panels And Discard In An Environmentally Responsible Manner. C. Remove All Existing Girts And Discard In An Environmentally Responsible Manner. D. Remove All Existing Gutter And Discard In An Environmentally Responsible Manner. E. Remove All Existing Eave Struts And Discard In An Environmentally Responsible Manner. F. Remove Three Roof Purlins (See Sheet A-1 Of The Attached Drawings). G. Remove Two Existing Exhaust Fans. 4.2 Construction A. Install New Eave Struts On The Northern And Southern Sides Of The Building. Eave Struts Are To Be Double-Dipped Galvanized. B. Install 3 New Roof Purlins As Indicated On The Attached Drawings. C. Procure And Install New Roof Panels. Roof Panels Are To Be 24-Gauge Galvalume With Kynar 500 Finish. D. Procure And Install A New Ridge Cover. Ridge Panels Are To Be 24-Gauge Galvalume With Kynar 500 Finish. E. Procure And Install Metal Flashing At The Roof To Masonry Transitions. F. Construct Concrete Foundations At The Northern End Of The Building. See Sheet #2 Of The Attached Drawings. G. Procure And Install Wall Girts. Wall Girts Are To Be Double-Dipped Galvanized H. Procure And Install C-Channel As Indicated On The Attached Drawings. See Sheet # 2 For Further Information. C-Channels Are To Be Double-Dipped Galvanized. I. Procure And Install New Wall Girts As Shown On The Attached Drawings. See Sheet #2 Of The Attached Drawings. All Girts Are To Be Double-Dipped Galvanized. J. Procure And Install Two 12’-0” X 12’-0” Roll Up Doors. See Sheets 1 & 2 Of The Attached Drawings For Further Information. K. Procure And Install One 3’-0” X 7’-0” Steel Door. See Sheets 1 & 2 Of The Attached Drawings For Further Information. L. Procure And Install New Guttering. M. Connect Downspouts To The Guttering System. N. Apply Chalking To Seal All Panel And Gutter Laps. O. Apply Chalking To Seal All Panel And Guttering Masonry Transitions. P. Procure And Install Two New Exhaust Fans With Accessories. (See Sheet # A-3 Of The Attached Drawings For Further Information.) Q. Procure And Install Three New Supply Fans With Accessories. (See Sheet # A-3 Of The Attached Drawings For Further Information.) R. Repair Concrete Spalling At The South-Eastern End Of The Building. The Spalling Must Be Corrected Using Sika-123 Products. See Clause # 5.7.0. S. Clean Up Site Upon Completion