Tenders Are Invited For Roof Works And Other Special Trade Construction Works – Fabrication Of Irwst / Pressurizer Wall Module (Commodity Code Ca02) For Ap 1000® Project - Unit 1

Roof Works And Other Special Trade Construction Works – Fabrication Of Irwst / Pressurizer Wall Module (Commodity Code Ca02) For Ap 1000® Project - Unit 1. The Ca02 Structural Module Is The Irwst / Pressurizer Wall Module, Located In The Nuclear Island (Ni). Ca02 Is Classified As Safety Related, Seismic Category I, And Westinghouse Safety Class C. The Ca02 Scope Is One Of The Smallest, Yet Still Complex Structural Modules In The Ap1000 Design. Ca02 Is Fabricated In 5 Sub-Modules Before Shipment To The Identified Site. Ca02 Has Associated Misc. Equipment Such As Embedded Piping And Electrical Conduits, Attachment Plates And Leak Chases; Temporary Supports Including U-Bolts, Nuts, And Fasteners; Hoist Rings And Inserts, And Conical Shapes For Reactor Piping And Hardware. 1. Experienced Manufacturers / Fabricators Capable Of Fabricating And Furnishing Ap1000® Structural Modules And / Or Shield Building (Described Below), Must (I) Contact (Email And/Or Phone Call) The Westinghouse Contact Person Identified In Section 1 To Express Interest And Request An Ap1000 Supplier Qualification Questionnaire, And (Ii) Upon Receipt, Complete The Ap1000 Supplier Qualification Questionnaire With Sufficient Detail For Westinghouse Evaluation And Return It Via Email To The Westinghouse Contact Person. If There Are Any Questions Or Clarifications Needed, Please Reach Out To The Contact Person Listed Above. 2. The Qualification Criteria Shall Be Included In The Ap1000 Supplier Qualification Questionnaire, Examples Thereof Include Demonstration Of: (I) Demonstrated Experience In Furnishing Similar Scopes In Large Carbon Steel Fabrication Such As Sub-Modules That Are Around 12.3 M In Length, 3.1 M On Width, And Wall Thickness Of .76 M, And Workshops Having >20 Tonne Crane Capacity), Stud Shooting, And Welding Of Dissimilar Metals Such As Stainless Steels, Carbon Steel And Duplex With Proper Segregation And Controls, Equipment Capabilities To Handle Plate Widths Up To 3.2 M, ; (Ii) Meeting The Quality Requirements For Such Equipment In A Nuclear Power Plant, Including Having A Westinghouse Or Niac Audited Nuclear Quality Program Complying With Nqa-1 And 10Cfr50 Appendix B; (Iii) Certification Of Compliance With All Applicable Governmental Policies, Requirements, Laws And Regulations, Applicable International Treaties Or Agreements, And Other Regulatory Requirements; (Iv) Financial Standing (Solvency) And (V) Verification Of Capabilities. 3. Upon Evaluation Of Your Response To The Ap1000 Supplier Qualification Questionnaire, Westinghouse Will Determine If Your Company Meets, Or Does Not Meet The Qualification Requirements And We Will Provide Feedback. Submission Of The Ap1000 Supplier Qualification Questionnaire Does Not Automatically Qualify Your Company To Be Supplier For The Project. 4. Each Qualified Supplier Will Be Required To Execute A Proprietary Information Agreement (Pia)(Non-Disclosure Agreement (Nda)). 5. Companies Meeting The Qualification Criteria And Who Have Executed The Pia Will Be Invited To Submit A Proposal. 6. The Request For Proposal (Rfp) Shall Include The Information About Award Criteri