Bids Are Invited For Acquisition Of Electrical Materials And Accessories, Intended For Public Lighting In The Municipality, In Support Of The Municipal Infrastructure Secretariat.

Continuous Conical Lighting Post Embedded In Fiber (Prfv) Of 9M Total Length (L), 100 Dan. Smooth Exterior Finish With Special Pu Acrylic Painting In Gray Color., Continuous Conical Lighting Post Embedded In Fiber (Prfv) Of 12M Total Length (L), 200 Dan. Smooth Exterior Finish With Paint Special In Acrylic Pu In Gray Color., Support With Fixing Screws For Top Of Tubular Metal Post With 90Mm² Diameter Fitting To Be Used In ?Petal? Triple. Minimum Metal Thickness Of 1.5Mm And Maximum Of 2Mm. Fitting The Petal To The Luminaire With A Diameter Of 48Mm² And A Length Of 01 (One) Meter On Each Tubular Rod, Where A Luminaire Will Be Fixed At Each End. Straight Rod Opening Angle, 90° In Relation To The Base. *Fire Galvanized., Support With Fixing Screws For The Top Of A Tubular Metal Post With A 90Mm² Diameter Fitting To Be Used In “Petal” Type Lighting. Pair. Minimum Thickness Of 1.90° In Relation To The Base, Hot-Dip Galvanized., 20 Watt Led Reflector, Minimum Luminous Efficiency Of 100Lm/W, Bivolt: 127/220V. With A Minimum Color Temperature Of 5000K And A Maximum Of 6500K. Minimum Lifespan Of 50,000 Hours. Power Factor, Greater Than Or Equal To 0.6. Irc≫80. Opening Angle 120°. Minimum Protection Index 66, Minimum 5-Year Warranty. Have At Least Some Of The Following Certifications (National/International): Inmetro, Procel, Cee, Rohs., 11/29/2024, 50 Watt Led Reflector, 100 Watt Led Reflector, 200 Watt Led Reflector, 400 Led Reflector Watts, Br2 Arm For Public Lighting With 48, 30 Mm² Diameter In Cast Aluminum Glass.Color: Black Dimensions:Height: 67.0 Cmwidth: 39.0 Cm.Voltage:Bivolt.Socket / Bulbs:1 X 3,000 Mm Length, Hot Dip Galvanized Curved At The Tip With Shoe With Two Holes For Passing M-16 Spindles., Triplex Aluminum Multiplexed Cable, With Two Black Insulated Cables And The Bare Neutral (Without Insulation And Without Steel Core). Section 16Mm²., Luminaire For Public Lighting In 30W Led, For Installation On A Tubular Metal Rod (Arm). Luminaires Must Be Manufactured From Injected Or Extruded Aluminum. They Must Have Couplings And Connections For Arms Up To 60Mm² In Diameter. The Luminaire Must Have A Heat Dissipation System Using Fins Exposed To The Weather For Proper Thermal Exchange. These Fins Must Form A Single Piece With The Surface On Which The Led Board(S) Will Be Installed. Fins, Fitted, Screwed, Glued Or Welded Will Not Be Accepted. The Optical Set Must Have Light Beam Distribution Lenses Made Of Thermo-Resistant Polymers With Anti-Yellowing Additives. This Lens(Es) Must Be Secured With Weather-Resistant Screws; Fitted, Quick-Closing, Or Clip-On Lenses Are Not Acceptable As These May Lose Pressure And Warp Over Time And Use. Only Luminaires With Limited Or Totally Limited Light Intensity Distribution Control Will Be Accepted. The Sealing Of The Vital Parts Of The Luminaires (Optical Assembly And Housing Of Electronic Components) Must Be