Tenders Are Invited For Dismantling Of Old Equipment And Delivery And Installation Of Refrigeration Equipment For The Cold And Freezing Room Of The Seed Extraction Plant In Klosnów

1) The Subject Of This Specification Is The Delivery And Installation Of Refrigeration Equipment For The Cold And Freezing Rooms Of The Seed Extraction Plant In Klosnów - The Delivered And Installed Equipment In Individual Rooms Should Meet The Following Parameters: I. Cold Store: Required Temperature In The Cold Store: 20C. 1. Condensing Unit – 1 Pc.• Type: Inverter, For R744 Refrigerant (Co₂).• Operating Parameters:O Evaporation Temperature (T₀): -10°C.O Condensing Temperature (Tₖ): 32°C.O Cooling Capacity Range (Q ): 7 – 15 Kw.• Additional Functions: Possibility Of Heating Air For Ventilation.• Meeting Standards: Ped Directive (Pressure Equipment Directive) - 2014/68/Eu, Iso Guidelines And Standards, Standard En 378 - Refrigeration And Heat Pumps, F-Gases And Eu Regulation 517/2014.2. Air Cooler – 1 Pc.• Type: Two-Fan, Direct Injection.• Cooling Capacity: 8 – 13 Kw.• Defrost System: Electric.• Block: Aluminum With Copper Pipes.3. Cooling And Electrical Installation:• Length Of Cooling Installation – 8 M, Copper Pipe. • Length Of Electrical Installation – 7 M (Electric Cable 5 X 4 Mm2). • Pipe Cross-Sections At The Input And Output – ⌀12,7.4. Insulation:• Insulation Thickness – 19 Mm. 5. Safety Devices:• High Pressure Switch – 1 Pc.• Safety Valve – 2 Pcs. Ii. Freezer: Required Temperature In The Freezer -20°C.1. Condensing Unit – 1 Pc.• Type: Inverter, For R744 Refrigerant (Co₂).• Operating Parameters:O Evaporation Temperature (T₀): -30°C.O Condensing Temperature (Tₖ): 32°C.O Cooling Capacity Range (Q): 4 – 8.5 Kw.• Meets Standards: Ped Directive (Pressure Equipment Directive) - 2014/68/Eu, Iso Guidelines And Standards, Standard En 378 - Refrigeration And Heat Pumps, F-Gases And Eu Regulation 517/2014.2. Air Cooler – 1 Pc.• Type: Double-Fan With Direct Injection.• Cooling Capacity: 4 – 8.5 Kw.• Defrost System: Electric.3. Refrigeration And Electrical Installation• Length Of The Cooling Installation – 5 M, Copper Pipe.• Length Of The Electrical Installation – 10 M (Electric Cable 5 X 4 Mm2).• Pipe Cross-Sections At The Input And Output – ⌀12,7.4. Insulation• Insulation Thickness – 25 Mm5. Safety Features• High Pressure Switch – 1 Pc.• Safety Valve – 2 Pcs.