Bids Are Invited For Procedure For Acquisition Of Outdoor Gym And Playground

Triple Galvanized Ski (No Shipping) - Manufactured With Carbon Steel Tubes Measuring At Least 2’ ½ X 2 Mm; 1’ ½ X 3 Mm; 1’ ½ X 1.50 Mm; 1’ X 2.00 Mm. Drawn Carbon Steel Tube 2’ X 5, 50 Mm Schedule 80 (60, 30×49, 22). Metal Of At Least 30 Mm X 50 Mm Flat Bar At Least 3/16’ X 1 ¼’. Use Solid Pins, All Bearings (Double Bearings), Phosphate-Based Surface Treatment; Colored Thermohardening Polyester Resin Protective Film With Electrostatic Powder Deposition System, Round Flexible Rubber Stops (53Mm X 30Mm), Mig Welding, Acetal Bushing, Parabout Anchor Of At Least 3/8 Zinc Plated And Fastening Nuts; Built-In Internal Plug Made Of Injected Plastic Measuring At Least 2’ ½ With A Spherical Finish Following The External Dimension Of The Tube. Injected And/Or Rubberized Plastic Finishes. 3M High Fixation Destructive Reflective Sticker With Identification Of Muscle Groups, Instructions For Use And Manufacturer Data., Chest Chest With Puller. Galvanized Upper Joint (No Shipping) - Manufactured With Carbon Steel Tubes Of At Least 3.½” × 3.75 Mm; 2” × 2Mm; 2” × 3Mm; 2” × 5.5 Mm; 1.½” × 2 Mm; 1.½” × 1.50 Mm; 1” × 1.50 Mm. Equipment Articulation Manufactured With A Tube With A Diameter Of At Least 114 Mm And A Minimum Thickness Of 7 Mm. Laser-Cut Carbon Steel Sheets With A Minimum Thickness Of 2 Mm; ⅛”, 3/16”; ¼”. Drawn Solid Iron Rods Of At Least ⅜” With Zinc-Plated Fixing Screws Of At Least ⅝” × 1.¼” And Zinc-Plated Washer Of At Least ⅝”. Double Bearings, Phosphate-Based Surface Treatment Are Used; Colorful Thermo-Hardenable Polyester Resin Protective Film With Electrostatic Powder Deposition System, Mig Welding, Zinc Plated Screws, Washers And Fastening Nuts; Internal 3.½” Plastic Built-In Plug With Spherical Finish Following The External Dimension Of The Tube, Injected And/Or Rubberized Plastic Finishes. Cold Galvanized Fastening Screws With Protective Cover. High Adhesion Destructive Reflective Sticker With Identification Of Muscle Groups, Galvanized Triple Walking Simulator (No Shipping) - Manufactured With Carbon Steel Tubes Of At Least 2’ ½ X 2 Mm; 2’ 1’ ½ X 1.50 Mm. Carbon Steel Plates Of At Least 4.75 For The Equipment Fixing Point And 1.9 Mm For The Foot Support Plate. Schedule 80 Drawn Carbon Steel Tube (73 Mm X 58.98 Mm). Use Solid Pins, Parabout Anchor Of At Least 3/8 X 2 ½, Zinc-Plated Screws; Injected And/Or Rubberized Plastic Finishes. High Adhesion 3M Destructive Reflective Sticker With Identification Of Muscle Groups, Triple Galvanized Riding Simulator (No Shipping) - Manufactured With Carbon Steel Tubes Of At Least 2’ ½ X 2 Mm; 2’ 1’ ½ X 3 Mm; 1’ ½ X 1.50 Mm; 1’ X 1.50 Mm; Flat Bar At Least 2’ ½ X ¼’; 3/16’ X 1 ¼’. Drawn Carbon Steel Tube 2’ X 5.30 Mm X 49.22 Mm). Carbon Steel Plates Of At Least 4.75 Mm For The Equipment Fixing Point And 2 Mm For The Printed Bench With Rounded Edges. Solid Pins And Phosphate-Based Surface Treatment Are Used; Colored Thermo-Hardening Polyester Resin Protective Film With Electrostatic Powder Deposition System, Washers And Fastening Nuts; Built-In Internal Plug In Injected Plastic Of At Least 2’ With Spherical Finish