Tenders Are Invited For Construction Of An Intake In Krępica And A Water Pumping Station With A Pressure Pipeline To The Prażmów Suw

1. The Subject Of The Order Is The Execution Of A Task In The Design And Build System (Scope Of Work And Specific Requirements In The Developed Functional And Utility Program): Construction Of An Intake In The Town Of Krępica And A Water Pumping Station With A Pressure Pipeline To The Prażmów Water Treatment Plant.2. Works Related To The Implementation Of The Subject Order Will Consist In: - Design And Construction Of A Pressure Pipeline With A Capacity Of 120 M3/H And Pressure Appropriate For Cooperation With The Prażmów Water Treatment Plant (Location Of The Pipeline Only In Roads/Municipal Plots), - Design And Construction Of A Water Intake Casing Along With A Complete Water Pumping Station With A Capacity Of 120 M3/H. The Design And Technical Solutions Must Take Into Account The Possibility Of Regulating (Adjusting) The Efficiency Of Intake From The Intake In The Range Of At Least 60 To 120 M3/H, - Supply Of A Power Generator (As An Emergency Power Supply) On A Mobile Chassis. The Order Includes The Design And Implementation Of Solutions For Switching On The Emergency Power Supply To Manually Controlled (Switched) Well Devices In The Location Of The Water Intake). Delivery On A Chassis Means That, As Part Of The Order, On Behalf Of The Ordering Party, The Completion Of All Formalities Regarding The Registration Of The Chassis, - Construction Of A Shelter In The Krępica Water Intake Area For The Purpose Of Locating The Generator, A Shelter With An Area Of 20 M2, Prefabricated, On A Structure Made Of Galvanized Steel Elements, With A Hardened Interior Base (Concrete Or Concrete Cubes), Covered With Trapezoidal Sheet Metal, - Design And Implementation Of The Development Of The Krępica Water Intake Area, Including Construction Of Thick Concrete Cubes. 8 Cm, On Cement-Sand Ballast And Crushed Stone Foundation. 10 Cm - The Surface Of The Access Road To The Well And The Surface Under The Shelter, With A Total Area Of ​​285 M2, And Including The Construction Of A Fence With A Total Length Of 200 M, Including A Protective Zone Around The Water Intake Area, Made Of Galvanized System Panels Made Of 6 Mm Wire, 2.00 M High, On A Concrete Base 0.2 X 0.3 M High, With An Entrance Gate Of Minimum Width 3.5 M And A Gate 1.0 M Wide, Galvanized Posts With A Wall Thickness Of 2 Mm. The Entire Fence Should Be Finished With A Spiral-Shaped Concertina, Mounted On Y-Shaped Galvanized Metal Brackets, Permanently Connected To The Fence (Including The Gate And Wicket). The Fenced Zone Must Provide For Free Access To The Intake In The Event Of Servicing Work On The Intake And Its Equipment (E.G. Replacing The Pump And Piping), - Design And Implementation Of Cabling Controlling The Operation And Monitoring (Including Operating Parameters) Of The Krępica Pumping Station - Led Directly From The Suw Location Prażmów. The Concept Of Control Cabling Also Applies To The Design And Implementation Of A Direct Line Of Permanent Energy Supply To The Water Intake From The Building O