Bids Are Invited For Acquisition Of Hospital Equipment For The Municipal Health Department.

Stretcher Cart With Hydraulic Lifting Stretcher Cart With Hydraulic Lifting: It Has A Radio-Transparent Articulated Bed With A Minimum Tube Structure Measuring 31.75 X 31.75 X 1.5 Mm; Elevation Controls By Hydraulic Activation Pedal On Both Sides Of The Stretcher, The Fowler, Back, Leg, Trendelenburg And Reverse Movements Are Powered Through A Hydraulic System By Manual Levers Positioned At The Head And Foot Of The Stretcher; Bed Equipped With Side And Front Bumpers. Structure In High-Reinforcement Steel Tube With Antioxidant Treatment And Electrostatic Painting Finish; Equipped With Hooks For Fixing The Drain Under The Bed, Stacking Side Rails (Accordion Type) And Iv Support With 2 Stainless Steel Hooks; Base In Tubular Structure 60 Pair Of Stacking Side Rails (Accordion Type), Mattress Compatible With The D-28 Stretcher And 5 Cm Thick And Stainless Steel Iv Support. Wheels Of At Least 6 In Diameter Entirely Made Of Plastic Material Equipped With A Directional Locking System And Total Locking Of The 4 Wheels For Greater Safety, Activated By A Single Pedal On Both Sides Of The Stretcher. Min. Height: 735Mm X Max. Height 1075 Mm, Length. Useful: 1840 Mm X Width: 550 Mm. Minimum Capacity Of 220 Kg. Warranty For The Equipment, Provided By The Manufacturer For A Minimum Of 12 (Twelve) Months., Lung Ventilator - Technical Specification: - Equipment Used In Cases Of Respiratory Failure, With The Function Of Pumping Air Enriched With Oxygen Into The Lungs; - Allow The Use Of Adult And Pediatric Patients, In Addition To Allowing Transport Between Beds; - Microprocessed With Its Own Compressed Air Generator, With Sensitivity To Flow Or Pressure; - Invasive And Non-Invasive Positive Pressure (With Leak Compensation); - Cycled By Time And/Or Pressure And/Or Flow; Touch-Sensitive Monitor, At Least 12”, Colorful, Which Displays Trend Curves — Pressure X Time, Flow X Time And Volume X Time, Loops And Respiratory Parameters, Protection Mechanism Against Accidental Activations Through Touch-Sensitive Screen Lock Touch. Flow Sensor Built-In To The Equipment (Fitting Of The Inspiratory And Expiratory Valves; Must Have A Cell For Measuring The Concentration Of 02; - Visual And Audible Indication Of Alarms, And Features A Leak Checker In The Circuit; - Operation With A Double Branch Circuit; - Must Have Expiratory Valve System With Built-In Flow Sensor - Controls: Fr 4 A; 100 Rpm; Flow Sensitivity 0.5 To 15 L/Min; Pressure Sensitivity — 10 A — 0.5 Cmh2o; Cmh2o; Ps 0 To 80 Cmh20; Have Etco2 Module; Device For Timed Increase Of O2 Concentration To 100%, For Use During Secretion Aspiration (Suction) Procedure With Automatic Return To The Previously Adjusted Value; Temporary Alarm Silence Via Key On The Front Panel - Ventilation Modes: Assisted/Controlled Ventilation; (A/C), Simv (P/V), Psv, Cpap, Prvc, Aprv, Duolevel E Vni; High Flow O2 Therapy Mode. - Storage Of Ventilation Parameters When Disconnecting Or Discharging The Patient, Avoiding The Loss Of Previously Adjusted Parameters With The Option Of Keeping Them Updated; - Standby Mode Or Stand By S, Dental Compressor - Compres