Bids Are Invited For The Purpose Of This Bidding Procedure Is To Record Prices With The Purpose Of Selecting The Most Advantageous Proposal For Future And Eventual Acquisitions Of Electrical Materials For The Maintenance And Expansion Of Municipal Public Lighting In Passo De Torres/Sc, According To The Specifications Minimum Values ​​Contained In The Notice, Terms Of Reference And Other Annexes.

Lot 1 - Reinforced Porcelain Nozzle E-27., Lot 1 - Arm For Public Lighting 25 Mm - 180Mm Circular Strap With Two Galvanized Bolts And Nuts Hot-Dip Galvanized With A Minimum Layer Thickness Of 100 Microns, Lot 1 - Circular Strap 200 Mm With Two Screws And Nuts Hot-Dip Galvanized With A Minimum Layer Thickness Of 100 Microns, Lot 1 - Solid Copper Conductor 1.5 Mm² Soft Temper, Class 1 Stringing , Pvc/A Insulation 70º C - Extruded Thermoplastic Compound Based On Polyvinyl Chloride, With Special Characteristics For Non-Propagation And Self-Extinguishing Of Fire, Having Characteristics To Provide A Good Finish And Facilitate The Sliding Of Wires Through Conduits., 11/22/2024, Lot 1 - Sodium Vapor Lamp 70W E-27, Tubular Bulb 50/60Hz, Minimum Luminous Flux 6000 Lm, With Inmetro E Procel Certification, Lot 1 - Open Public Luminaire E-27, Dimmable Spotlight, Measuring 34X28cm With Porcelain Nozzle, 2 Wires (Positive/Negative) Flexible 1.5Mm, With Aluminum Support With 2 Hexagon Screws 5Mm, Fixed By 4 Rivets, One In Each Corner Fire And In Compliance With Nbr 5123, Dielectric Strength Of 2500 V, Current: 10 A, 360º Rotating Socket, Pvc, 3-Wire Connection: Phase 1 (Black), Neutral Or Phase 2 (White) And Load (Red), Indelible Marking Map With Identification Of The Relay Fitting Direction And Identification Of Plug-In Terminals, Lot 2 - Reinforced Porcelain Nozzle E-40., Lot 2 - Arm Curved For Public Lighting 3000Mmx48, 3Mm, Tube Thickness 3Mm, Without Shoe, With Minimum Layer Thickness Of 100Micrans, Lot 2 - Circular Strap 220Mm With Two Bolts And Galvanized Nuts With Minimum Layer Thickness Of 100Micrans, Lot 2 - Circular Belt 240Mm With Two Screws And Nuts Hot Dipped Galvanized With A Minimum Layer Thickness Of 100 Microns, Lot 2 - Circular Belt 260Mm With Two Screws And Nuts Hot Dipped Galvanized With A Minimum Layer Thickness Of 100 Microns, Lot 2 - Solid Copper Conductor 2, 5Mm² Soft Tempera, Pvc/A70ºc Insulation, Extruded Thermoplastic Compound Based On Polyvinyl Chloride, With Special Characteristics To Prevent The Spread And Self-Extinguishing Of Fire, Having Characteristics To Provide A Good Finish And Facilitating The Sliding Of Wires Through The Conduits., Lot 2 - Bimetallic Connector, Derivator Type Split Screw Cable Wire 1 Screw 10 To 50Mm; Squeeze Connection. High Electrical Conductivity And Corrosion Resistance. Allows Bimetallic Connections., Lot 2 - Simultaneous Clamping Connector, Through Insulation Perforation Used In Low Voltage In Polymeric Material And Tinned Copper Contacts. Main Contact 10/95Mm And Derivation 1.5/10Mm., Lot 2 - Black Pvc Insulating Tape 20 Meters - 19 Mm 28000Lm, 50/60Hz, Certified Inmetro E Procel, Lot 2 - Closed Public Light. Anodized Stamped Aluminum Reflector, Polycarbonate Prismatic Lens Refractor, Cast Aluminum Socket/Arm Fitting, Gray Electrostatic Powder Paint Finish, Heat And Aging Resistant Sealing Joints, Fitting For Tube 2 With Porcelain Socket And -40., Lot 2