Request For Quotation Procurement Of Materials In The Workshop Control Of The Use And Repair Of Measuring And Electrical Equipment According To The Technical Specification

The Number Of Veins Is 4 The Cross-Section Of The Wire Is 6 Square Mm Power Cables Are Used For Transmission And Distribution Of Electrical Energy In Stationary Installations. They Have High Strength And Reliability, And Are Also Resistant To Mechanical Damage And Corrosion. They Are Widely Used In Industry, Construction And Other Areas Where The Transmission Of Electricity Over Long Distances Is Required., They Are Intended For Connection Of Neutral Conductors (N Bus) And Grounding (Pe Bus). Tires Are Made Of Brass And Nickel-Plated Brass. The Neutral Bus Is Installed On The Insulator., • Additional Features White Color Main Manufacturer Mounting Type Surface Mounting The Width By The Number Of Modular Spaces Is 12 Number Of Rows 1 White Color Degree Of Protection - Ip Ip41 Height, Mm 200.0 Width, Mm 255.0 Depth, Mm 97.0 Color Number Ral 9016 Body Material Abs Plastic Cover Type Closed Type (Closing) Installation Depth - Niches, Mm - The Shape Of The Cover Is Closed Type (Closing) Possible Extension No With Mounting Plate No With A Transparent Cover Yes Din Rail Yes Emc Type No, Tree Species Birch, Thickness -12 Mm, Width -1525 Mm, Type Of Plywood, Length 1525 Mm, Quantity: 1 Type: Din Rail Material: Steel Height: 7.5 Mm Width: 35.0 Mm Length: 200.0 Mm, Metal Screw 60 Mm (Self-Tapping Screw For Plasterboard 4.2*60) Is Used For Mounting Plasterboard Sheets To The Profile. A Screw With A Fine Thread And A Sharp Tip, The Drilling Capacity Of Which Is Up To 0.9 Mm. The Tip Of The Screw Is Sharp, The Head Is Concealed, With A Cross-Shaped Slot. It Is Intended For Fastening Various Parts To Profiles Or Sheet Metal. It Can Also Be Used With Hard Wood. Due To The Small Pitch Of The Thread, It Is Securely Attached To The Base, Without Scrolling And Loose., A 40 Mm Metal Screw (Self-Tapping Screw For Plasterboard 4.2*40) Is Used For Mounting Plasterboard Sheets To The Profile. A Screw With A Fine Thread And A Sharp Tip, The Drilling Capacity Of Which Is Up To 0.9 Mm. The Tip Of The Screw Is Sharp, The Head Is Concealed, With A Cross-Shaped Slot. It Is Intended For Fastening Various Parts To Profiles Or Sheet Metal. It Can Also Be Used With Hard Wood. Due To The Small Pitch Of The Thread, It Is Securely Attached To The Base, Without Scrolling And Loose., The Manufacturer Is Abb The Maximum Cross-Section Of The Wire Is 25 Square Meters. Mm Degree Of Protection Ip-20 Mounting Type-On A Din Rail Weight - 0.1 Kg The Basic Series Of Automatic Switches M Protects Installations From Overloads And Short Circuits, Guaranteeing Reliability And Safety Of Operation. Abbs Basic M Series Meets Most Of The General Requirements For Circuit Breakers, Allowing The Use Of Different Pole Configurations, Characteristics And Rated Currents For Domestic And Commercial Applications. This Product Is Manufactured In Accordance With International Iec Standards., Automatic Circuit Breaker Se R9f02332 (Ав) 3P B 32А 6 Ka Resi9 A Series Of Automatic Circuit Breakers For Residential Facilities, Hospitals, Schools, Kindergartens And Industry. Switches With The Most Demanded Characteristics Are Used In Projects Where The Installation Of Additional Contacts, Releases And Other Accessories Is Not Required. Convenience -Equipped With Non-Falling Screws. - Installation In Any Position. - Power Supply From Any Side. Safety - Curtains Of The Terminal Space Will Protect Against Accidental Contact With Current-Carrying Parts. - Sealing Of The Terminals With The Help Of An Accessory Will Indicate An Unauthorized Connection. - Short-Circuit Current Limitation: The Machine Switches Off Faster Than The Short-Circuit Current Reaches Its Maximum. The Mechanism Of Quick Switching Does Not Depend On The Speed Of Movement Of The Lever, It Reduces The Wear Of Contacts And Extends The Service Life Of The Device. B — Machines Of This Category Are Triggered When The Load Exceeds The Rated Current By 3-5 Times. Automatic Switches Of Category B Are Intended For Installation In Electric Networks With No Or Minimal Starting Current (Electric Motors, Etc.). In Simple Words, Machines Of Category B Are More Sensitive To The Passing Current, And When Powerful Electric Motors Are Started, They Can Work. C — Automatic Switches Of The Standard Type With An Even Greater Overload Capacity Than Those Of B Class Automatic Switches. They Are Turned Off If The Nominal Current Passing Through The Machine Becomes 5-10 Times Higher. The Activation Time Of The Machine Of Category C Is About 1.5 Seconds. Such Machines Are Intended To Ensure The Protection Of General-Purpose Electrical Networks., Box For Under-Plaster Installation.