Tenders Are Invited For Container-Handling Equipment – ​​Acquisition Of A Mobile Container Handling Truck

Container-Handling Equipment – ​​Acquisition Of A Mobile Container Handling Truck. Purchase Of The Equipment (Vehicle) Specified Below In The Framework Of A Sales Contract According To The Conditions Specified In Detail In The Technical Description Of The Public Procurement Documentation: 2 New Mobile Telescopic Boom Container Handling Trucks For Lifting Containers And Semi-Trailers, For Railway/Road Operations With Business Elements In The Framework Of A Mixed Sales Contract. The Tenderer Is Also Responsible For The Maintenance Of The Machines During The First 36 Months Following The Commissioning Of The Machines. Main Technical Parameters Load Capacity: • For Lc1 Up To 5 Containers (96) Height Min.: 41 Tons • For Lc2 Up To 5 Containers (96) Height Min.: 23 Tons • For Lc3 Up To 3 Containers (96) Height Min.: 9 Tons • Loader Length Including Spreader (Closed Boom) Max. 12000Mm(-10%) • Loader Width 4000-4300Mm • External Turning Radius Max. 9,500 Mm • Dead Weight Max. 75,000 Kg (- 10 %) • Necessary Aisle Width With 40 Container 13,500-13,800 Mm • Telescopic Boom • Spreader Lateral Movement ± 750-800 Mm • Spreader Pps (Tilt) ±5° (+ 10 %) • Ce Certificate The Detailed Technical Parameters Can Be Found In The Technical Description Included. The Winning Bidders Obligation Is To: - Transport And Hand Over The Equipment To The Place Of Performance, Assemble It, And Put It Into Operation - Train And Educate The Operating Personnel Employed By The Tenderer, According To The Provisions Of The Attached Draft Contract, For At Least 2 People, For At Least 1*6 Hours. - A Full Set Of Spare Tires Must Be Delivered To The Container Loading Trucks. Mandatory Warranty Period • General Warranty Minimum 24 Months • Painting 60 Months Only New Equipment Can Be Recommended. In This Regard, A New Device Is Considered To Be A Device That Has Not Been In Use Either In Hungary Or Abroad, And Has Not Been Used As A Demonstration Or Trial Product. The Product Properties Specified In The Technical Description Are Minimum Requirements. The Proposed Device Must Have At Least The Expected Product Properties Required By The Bidder. The Tenderer Also Accepts A Product With Product Properties Equivalent To Or Better Than The Minimum Product Properties. 321/2015. (X.30) Govt. Acts With Regard To The Provisions Of Section 46 (3) Of The Decree. All References To Things Of A Specific Make, Origin, Type, Process, Activity, Person, Patent Or Trademark In This Call For Tenders And In The Public Procurement Documents Were Made Necessary By A Clear And Understandable Definition Of The Subject Of The Public Procurement, But The Name Is Only A Clear And Clear Definition Of The Subject Of The Public Procurement Was Made In Order To Define It In A Comprehensible Manner And The Contracting Authority Accepts An Equivalent Offer, Provided That The Equivalence - In Case Of Doubt - The Tenderer Must Prove The Above