Bids Are Invited For Acquisition Of Permanent Material - Furniture

014.74.00152 - Table. - Dining Table With 8 Seats, With Chair, 014.74.00353 - Supreme President Chair - Technical Specifications: Casters Available Options: Pu Caster: Consisting Of Two Circular Pulleys, Measuring 55 Mm In Diameter, Manufactured In Its Central Region In Polyamide (Pa) And Its Tread Made Of Polyurethane (Pu), Intended For Hard Floors. Note: The Same Description Above Applies To The Pu Caster With A Diameter Of 50 Mm. Aluminum Base: Consisting Of Five Support Paddles For Fixing The Castors And A Tapered Central Hole For Coupling The Gas Column, Obtaining A Diameter In The Order Of 706 Mm. The Set Is Made Of Aluminum Alloy Material Using The Pressure Injection Process: Made Of Steel With A Body Predominantly Made Of 2.5 Mm Thick Sheets. The Mechanism Receives A Metallic Surface Preparation Protection And Electrostatic Powder Epoxy Coating, Which Guarantees Protection And A Longer Useful Life For The Product. It Has Only One Lever Located On The Right Side, Which, When Rotated, Controls The Activation Of The Gas Column, For Adjustment. Height Of The Chair, And When Pulled And Pushed, It Locks And Unlocks The Reclining Movement Of The Backrest. The Mechanism Has The Following Features: - Synchronized Reclining Movement Of The Backrest/Seat With A Locking Position, And A Tilt Ratio Of 1 :1. -Free Floating Option, Where The Backrest Is Free For Movement, Keeping It Always In Contact And Under Pressure With The Users Back. This Pressure Can Be Adjusted Through A Knob On The Front Of The Mechanism., 014.74.00354 - Supreme Fixed Director Armchair Chair - Its Configuration Is Defined By A Fixed Structure Manufactured In Carbon Steel Tube With Measurements Of 20X 45Mm And Thickness 1.5 Mm, Made Using The Calendering Process, And In An Oblong Tube With Dimensions Of 16 X 30 Mm And A Thickness Of 1.5 Mm. The Support For The Seat Is Made Of Carbon Steel Tube With A Diameter Of 25.4 Mm With A Wall Of 1.90 Mm, Made Using The Tube Bending Process. Structure And Supports Are Joined Together Using The Mig Welding Process. The Structure Contains Four Shoes Designed To Keep The Base Supported On The Floor And Mainly To Avoid Direct Contact Between The Metal And The Supporting Surface. At The Lower Ends Of The Structure There Are Two Buffers, Developed For The Protection And Finishing Of The Set, Made Of Thermoplastic Material Called Polypropylene (Pp), Using The Injection Process. The Set Is Fixed To The Shell Structure Using Two Supports Fixed To The Upper Part Of The Shell, Made Of Steel Sheet. Carbon With A Thickness Of 4 Mm, Fixed By Means Of Screws And Joined To The Support Arms Through Mig Welding. The Assembly Receives Protection Against Corrosion, Characterized By The Metal Surface Preparation Process Using Nanoceramic Technology And Coated By Electrostatic Epoxy Powder Painting, Or Chrome Plating.B)Arm Supportsarm Support Set In Fixed Condition And Used For Positioning The Arms In A Single Position, Ergonomically Comfortable, Made Of Polypropylene Using The Injection Process.C)Seat/Back Set Consisting Of Two Shells Developed In Wooden Plywood, Both Are Approximately 6 Mm Thick, Machined And Drilled In Order To Obtain The Configuration Of The Product. At The Location Of The Holes, Fixing Nuts With Claws Are Inserted.