Tenders Are Invited For Reconstruction And Renovation Of Rooms Within The Basement In The Main Building Of The State Academy Of Applied Sciences In Głogów

3. As Part Of The Implementation Of The Subject Of The Order, The Following Works Are Expected To Be Performed: 1) Removal Of All Unnecessary Items From The Basement Rooms And Securing The Construction Site. 2) Disassembly Of Doors And Door Frames. 3) Demolition Of Unnecessary Partition Walls. 4) Removal Of Damaged, Damp Interior Walls. Plastering, Drying External And Internal Walls, Repairing Damage To The Masonry Material. Plasters Should Be Removed To A Height Of At Least 0.8 M Above The Visible Moisture Line (Approx. 2.0 - 2.5 M); In Rooms On The South Side, The Entire Plasters Should Be Removed.5) The Spacing Of The Existing Steel Joists Should Be Checked And Supplemented. Fill The Spaces Above The I-Beams With Expanding Technical Mortar. Check And, If Necessary, Tighten The Lock Nuts Of The Steel I-Beam Spacers And The Openings. 6) Construction Of New Brick Partition Walls. 7) Dismantling The Existing Floor Layers, Removing Rubble From The Building, Leveling The Area For Future Floor Layers. Leveling Faults And Level Differences. 8) Construction Of New Floors With Moisture And Heat Insulation. In The Server Room No. 21, The Floor Should Be Supplemented And Adapted To The Existing One, As In The Equipment Room.9) Installation Of New Floor Coverings On The Floors (Target, Stoneware). Stoneware Tiles With Dimensions ≥30X30 Cm On An Adhesive Mortar Intended For Critical Substrates (With Increased Adhesion, Expansion And Strength). Tiles With Abrasion Class ≥ Class Pei Iv And Anti-Slip Tiles ≥ Class R10. The Color And Type Should Be Agreed With The Investor Before Purchase. Use Tarket Floor Coverings With Appropriate Technical Parameters Intended For Teaching And Conference Rooms. Iso Product Type - Homogeneous Pvc Floor Coverings, Object Classification - 34 Very Intense Traffic, Industrial Classification - 43 Intense Traffic, Surface Protection - Pur. Wearing Layer Min. 2.0 Mm, Flammability Class Min. Bfl-S1. Color To Be Chosen By The Investor. 10) Construction Of Technological Channels Of The Installation Routes. Technological Channel With An Internal Width Of 0.8 M, Walls Thick. 0.1 M Made Of Concrete, The Channel Contains Active Central Heating Main Installations Along With Branches For Radiators In The Basement Rooms, Water Installation And Structural Infrastructure Cables. Before Construction, The Channel Should Be Opened By Dismantling The Cover From Concrete Slabs, Cleaned, Tidied Up The Installations, And Improved Supports And Installation Fastening Elements (New Fixings Should Be Made If Necessary). The Concrete Walls Of The Canal Should Be Brought To The Required Technical Condition For Mounting The Selected Type Of Canal Covering On The Basis Of The So-Called Raised Technical Floor. All Elements Of The Channel Cover Plates Must Be Able To Be Easily Dismantled And Have Access To The Installation Along The Entire Length Of The Channel In Order To Be Able To Control And Expand The Infrastructure. The Covering Slabs Must Be Constructed I