Bids Are Invited For Price Registration For Acquisition Of Playground-Type Toys - Playgrounds For Installation In The Jardim Planalto Neighborhood And Outdoor Gym Equipment For Installation In The Community Of Alto Boa Vista, In This Municipality.

Colorful Playground Set With Main Structure (Towers) In Aluminum Columns, With Minimum Measurements Of 100Mmx100mm Width, Plate Thickness 3Mm; Smooth, Without Corners And Recesses; With At Least 3 Internal Reinforcements; Painting With Polyester Powder Paint, Containing: 1 - Tower With 4 Aluminum Columns With A Minimum Length Of 3,000 Mm, Platform With A Width Of At Least 1.0 X 1.0 M, Installed At A Minimum Height Of 1.40 M, Made Of Double Rotomolded Plastic, Square Pyramid Shape Cover Measuring At Least 1300Mm 650Mm In Rotomolded Plastic.1 - Auxiliary Tower With 2 Aluminum Columns With A Minimum Of 2,500Mm In Length, 20M, Without Cover, With Column Finishes (Caps). Long X 80Cm Wide, Non-Slip Plastic Wood Floor, With Itaúba Sleepers. With A Tubular Steel Structure With A Minimum Diameter Of 2.5Cm And A Wall Of 1.90Mm. Vertical Bars With A Minimum Diameter Of 1.5 Cm. 00M Long, 1 Auxiliary Deck Measuring At Least 0.60M To The Floor With Plastic Outlet Section Rotomolded Duplo.1 - Rope Ramp Measuring At Least 1.5M Material: Round Carbon Steel Tubes Measuring At Least 4 ½ X 2.00 Mm; 3 ½ X 2.00 Mm; 2 X 2.00 Mm; 1 ½ X 4.25 Mm; 1 ½ X 2.00 Mm. Carbon Steel Plates Of At Least 6.35 Mm; 4.75 Mm And 2.00 Mm. Welding: Mig Type. Finishes: Bushing System With Limitation, Eliminating Limb Trapping. Double Shielded Bearings Are Used. Built-In Internal Plug In Injected Plastic Measuring At Least 3 ½ And 2, Both With A Spherical Finish Following The External Dimension Of The Tube. Injected And/Or Rubberized Plastic Finishes. Seat And Back Made Of Rubber (Vulcanized) With Dimensions Of At Least 335Mm X 315Mm. Zinc Plated Screws, Washers And Fastening Nuts. High Fixation Destructive Reflective Sticker With Identification, Instructions For Use And Manufacturer Data. Painting: Treatment With A Phosphate-Based Submerged Bath. Electrostatic Powder Deposition System With Colored Thermo-Hardening Polyester Resin Protective Film. Fixing Method: Anchor With Flange Of At Least 230 Mm X 3/16, Laser Cut With Zinc-Plated Fixing Screws Of At Least 5/8 At Least 3/8, Zinc-Plated Screws, Washers And Fastening Nuts. Dimensions: Height 1.88 Mts X Width 65 Cm X Depth 1.82 Mts Maximum Recommended Weight Per User: 120 Kg. Maximum User Capacity:2. Age Range: Over 12 Years. With Installation At The Location Previously Defined By The Requesting Sector., At