Bids Are Invited For Hiring Of A Company Specialized In The Supply Of Machines And Equipment To Subscribe To The Transfer Instrument Entered Into By Caixa Econômica Federal No. 4115002/2023, Terminating Between Itaipu Binational And The City Hall Of The Municipality Of Marilena, State Of Paraná.

Electronic Scale Electronic Scale With Ramp With Capacity Of Up To 1000 Kg And 500 Gram Division, Platform Of 1000 Mm Bale Weighing Certified And Standardized By Innmetro, Enables The Weighing Of Big Bag Trolleys And Bales And Equipped With An Access Ramp With Structure In Sae 1008/1010. Plate Thickness Of Minimum 3Mm, 10 Degree Inclination And Anti-Slip Tapes On The Inclined Face Weight And Fixing By M8 Bushings. Bivolt Voltage 110/220 V. With 12 Months Warranty After Installation., Small Biodigestor Biodigestor, Technical Requirements • Gas Tank Volume: 2,500L; • Biodigestor Tank Volume: 4,000L; • Uses Food (Kitchen) And/Or Animal Waste; • Material: Polyethylene Canvas With Uv Protection; A Biogas Stove; • External Gas Piping (Minimum 10 Meters) And Internal Gas Piping (Minimum 3 Meters); • Gas Filter; • Combined Gas And Fertilizer Output; • Detailed Assembly Guide (Digital File); • Warranty: Minimum 12 Months. With Reference To The Abnt Standard Nr Isso 23590 - Home Biogas System Requirements — Design, Installation, Operation, Maintenance And Safety, With No Type Of National Or International Certification Being Required., Waste Separation Belt, Minimum Size: 10, 50M; In Metal Structure With Anti-Corrosion Coating; Equipped With An Electric Gear Motor Of At Least 1Kw; Product Dimensions: 1010Mmx1380mmx10500mm (Height X Width X Length); Useful Sorting Width On Conveyor Belt: 1000Mmx10500mm; With Rubber Side Protection To Prevent The Accumulation Of Waste On The Conveyor Belt; Flat Base In Sheet Steel For Sliding The Belt; Conveyor Belt Speed ​​Variation System, Through Frequency Inverter And Potentiometer Controlling The Advance Of The Belt Determining The Speed ​​For Operation From 0 To 8 Meters Per Minute; Bearings With Adjustment System For Conveyor Belt Alignment; Machined And Galvanized Traction Rollers; Electrostatic Painting; The Equipment Must Be Compatible And Installed On A Waste Lifting Conveyor With A Width Of 13800 Mm. Warranty: Minimum 12 Months, Waste Lifting Belt, Minimum Length Of 6,000Mm And Maximum Of 10,000Mm And 1,380Mm Width; With Fixed Type Flights And Hopper With Metallic Structure Lining The Gap At The Bottom Of The Belt, Monoblock Type Structure Built With Steel Plates, Flat Base In Steel Plate For Belt Sliding, Usable Fabric Width 1,000Mm And Flight Width 800Mm, And A Minimum Height Of 60Mm, Equipped With A Motor Reducer Of At Least 3 Hp, Controlled Via A Frequency Inverter And Can Be Regulated Using A Potentiometer From 0 To 8 Meters/M, Canvas With Splices And A Pressed Clamp Splice For The Lifting System And Side Seals , With A Drive System For Emergency Shutdown For Equipment Operators, The Lifting Belt Must Be Compatible And Installed/Coupled With The Flat Separation Belt With Dimensions Of 1010Mm Height X 1,380Mm Width X 10500Mm Length, Through A Feed Funnel , Uniting The Two Equipment, New Equipment With 12 Month Warranty After Installation. Note. In Case Of Existence Of A Separation Conveyor In Operation At The Uvr, The Equipment Model To Be Used