Bids Are Invited For The Acquisition Of These Items Is Essential To Guarantee The Protection And Performance Of Firefighters In Fire-Fighting And Rescue Situations. Each Equipment Contributes To The Effectiveness Of Operations, As

Level Passer For Fire Hose - Equipment Made Of Cast Iron, In Black With Yellow Stripes For Better Visualization, Used To Protect The Fire-Fighting Hose When It Is Necessary To Cross It With The Truck. Approximate Length: 76 Cm; Approximate Width: 42 Cm; Approximate Height: 9 Cm; Width And Height Of The Gap To Fit The 1 ½ And 2 ½ Hoses Of Approximately 11 Cm; It Has Two Side Handles For Transportation; Maximum Weight Of 23 Kg., Brass Storz Wrench For Hose 1.1/2 The Function Of The Storz Double Wrench Is To Assist In The Coupling And Disengagement Of Hoses Used For Fire Fighting. The Double Storz Wrench Is Made Of Brass And Has A Brushed Finish. Material: Cast Brass, Brushed Finish; For 1.1/2’’ And 2.1/2’’ Storz Quick Coupling Connections; Application: For Assembling Fire Fighting Systems Connections; Thickness: 7 Mm; Produced In Brass, They Are Suitable For Assembling Connections In Diameters Of 1.1/2” And 2.1/2”. To Open Them. Maneuver Wrench Made From 1045 Solid Steel, T-Shaped With Forged Conical Square Mouthpiece, Measurements Are Defined According To The Head Of The Record Or Cover. Used To Open And Close The Hydrant Valve, Facilitating The Manual Operation Of Devices Installed Under Covers. Lower Hole That Fits The Valve Spigot; Lower Protrusion In Trapezoidal Shape., Head Kit For T Type Key - Used In Cases Of Maneuvering By “T” Type Key Of Registers, Butterfly Valves And Wall Ducts, Can Be Used On An Extension Rod. Manufacturing Material - Ductile Iron; Head Model Numbers 6, 7, 8, 9, 10 And 11.