Tenders Are Invited For Construction Work – Energetic Modernization Of The Main Building Of Pte Áok

Construction Work – Energetic Modernization Of The Main Building Of Pte Áok. Facades 1.1. Demolition Works: Demolition Of The Existing Facade Cladding On All Facade Surfaces, As Well As Demolition Works (Including Building Engineering, Building Electrical Engineering, And Weak Current) Necessary For Re-Insulating The Building Envelope And Replacing The Facade Windows. 1.2. Construction Tasks: The Facades On The Outside: • Construction And Civil Works Necessary For The Creation Of A Green Facade • Construction Of Iridescent Aluminum Composite Sheet Facade Cladding Up To The 4Th Floor • Construction Of White Aluminum Composite Sheet Cladding On The 4Th Floor Facade • On The North Side Implementation Of The Thermal Insulation System Plastered Up To The First Floor • Double-Layered Glass Walls Should Be Made Above The Main Entrance, With Iridescent External Glazing, • The Windows On The Facades Will Be Framed. • Thermal Insulation Of Exposed, Underground And Plinth Zones At Facades • Construction Of Horizontal (Slab Zones), Vertical (See Plans) And Fire Barriers Around (Mostly Above) Windows On Facades Internal Facades: • Construction Of Ventilated Facade Solution, Composite With Metal Cladding • Installation Of New Windows In Marked Places • Removal Of Windows And Wall Openings In Marked Places 1. Flat Roofs 1.1 Demolition Work: Demolition Work On The Levels Of The Closing Building And The Surface Of The Flat Roofs In The Inner Courtyard Is Also Necessary To Re-Insulate The Building Envelope From Heat And Water (Building Engineering, Building Electricity, Weak Current (Including Specialist Areas) Demolition Works. 1.2 Execution Tasks: External Flat Roofs: • Design Of Attic • Laying Of New Foam Glass Thermal Insulation And Two Layers Of Bituminous Sheet Insulation On The Entire Surface Of The Roof. • Construction Of New Steam Vents, 1 Per 20 M2 On The External Roofs. • Construction Of Xps Thermal Insulation With Concrete Cladding In The Plinth Zone On The Plastered Facade. • Construction Of A New Confluence Internal Flat Roofs: • Attic Construction • Laying Of New Foam Glass Thermal Insulation And Two Layers Of Bituminous Plate Insulation On The Entire Surface Of The Roof. • Building A New Confluence • Raising Waterproofing On The Outer Plane Of Structures At Full Height. • Covering Of Basement Skylights 2. Heat And Smoke Extraction Dome: • 1 Heat And Smoke Extraction Dome Will Be Installed In The Ceiling Of The Uppermost Landing Area Of ​​The Staircase On The Northeast Side 3. Facade Doors And Windows: • The South, East And West Exterior , As Well As On The Eastern, Western And Northern Internal Facades, The So-Called Construction Of Framed Windows With A Support Frame • Installation Of New Aluminum Doors And Windows With 3-Layer Glass. • Placement Of Motorized Blinds With Hidden Design • Construction Of The Curtain Wall Behind The Main Staircase In The North • Installation Of Fire-Resistant Doors And Windows Due To The Fire Sectioning 4. Pathology Reception Building Part: • Demolition Of The Existing Steel Structure Construction Of A New Reception Building Extension Main Quantities: - Façade Doors And Windows: 3133 M2 - Flat Roof Insulation: 5697 M2 - Facade Insulation: 11562 M2 The South Side