Request For Quotation According To The Technical Specification, The Circulation Pump For Hot Water

It Will Provide A Circulation Pump For Hot Water According To The Technical Characteristics: Power Supply: At Least 220 V/ 50 Hz. Electrical Power: Not Less Than 400 W. Lifting Height: No More Than 11 M. Flange Diameter: No Less Than 50 Mm. Productivity (At A Pressure Of 0.5): No More Than 22,200 L/H. Weight: No More Than 18 Kg. Dimensions: No More Than 314*280*170*84 Mm. Insulation: Class E. Max. Productivity (With A Total Pressure Of 0.5M): Not Less Than 19500 L/H. Main Use: Boiler For Indoor Installation. Water Temperature: Max. 80°C. Ip Code: Ip 10. Pipe Size: Not Less Than 50 Mm. Amount Of Condensate (L/H) 0.73: Pipe Diameter (Mm) 6/12. Power: Not Less Than 400 Kcal/Hour. Weight: No More Than 30 Kg. Pipe Diameter: Not Less Than 50 Mm. Connection Type: Flanged. Rotor Type: Dry. Nominal Current: 5.5 A. Poles/Modes: 2P/Long Mode. Field Of Application: Circulation Of The Heating System. Increased Pressure In The Water Heater. Increase In Pressure In The Heating System. The Product Must Be Equipped With A Built-In Engine Protection Device. 3 Year Warranty. Gost 31839-2012, Circulation Pump. Main Characteristics: Type - Superficial. The Type Of Surface Pump Is Circulation. The Maximum Head Is At Least 8.0 M. The Throughput Is At Least 10.2 Cubic Meters. M/H Network Voltage - No More Than 220 V. Power Consumption - No Less Than 246.0 W. Additional Information: The Permissible Liquid Temperature Is Not Less Than 110°C. Water Quality Is Clean. Installation Of The Pump Is Vertical. Features - Protection Against Overheating, Protection Against Dry Running, Automatic Water Level Control. Dimensions - No More Than 25X15x15 Cm. Weight - No More Than 4.5 Kg. In Addition, The Set Does Not Include A Network Connection Cable; You Should Use A Heat-Resistant Three-Core Cable With A Cross-Section Of Each Core Of At Least 0.75 Mm2 And With Rubber Insulation. Gost 31839-2012