Bids Are Invited For Acquisition Of Hydraulic Consumables For Maintenance And Installation Of Equipment, Such As Mini Boosters And Vrps In The Treated Water Supply System. - Samae.

Ring, Type: For Fluffy, Material: Pba Rubber, Size: Tb 150 Mm - Ring, Size: Tb 150 Mm; Technical Specification: Pba Rubber Ring For Fluffy Tb 150 Mm; Toroidal Rubber Ring For Defofo Pvc Pipes Dn 150; Toroidal Rubber Ring For Pvc Pipes And Connections 12 Manufactured In Accordance With Nbr 7665, For Drinking Water Distribution Networks; Note: Due To The Differences Between The Tolerances And Shapes Of The Profiles Of The Ring Housings, Tubes And/Or Fittings, From One Manufacturer To Another Manufacturer, It Is Recommended That A Rubber Ring Manufactured By A Specific Manufacturer Be Used Only In Piping From The Same Manufacturer; Therefore, The Ring Must Be Properly Identified With The Name Or Brand Of The Tube Or Fitting Manufacturer, The Name Or Brand Of The Ring Manufacturer, The Nominal Diameter (Dn) And The Standard Number (Nbr 7665)., Size: Tb 200 Mm - Ring, Size: Tb 200 Mm; Technical Specification: Pba Rubber Ring For Fluffy Tb 200 Mm; Toroidal Rubber Ring For Defofo Pvc Pipes Dn 200; Toroidal Rubber Ring For Pvc Pipes And Fittings 12 Manufactured In Accordance With Nbr 7665, The Nominal Diameter (Dn) And The Standard Number (Nbr 7665)., Collar, Type: Pe/Flange, Model: For Hdpe Pipes For Nets, Material: Electrofusion Polyethylene, Size: 110, Nominal Pressure (Pn): 16 Kgf/Cm² - Collar, Size: Dn 110, Nominal Pressure (Pn): 16 Kgf/Cm²; Technical Specification: Electrofusion Polyethylene Collar/Flange For Hdpe Tubes For Networks, Dn 110, Pn 16; Pe Collar/Polyethylene Flange; Manufactured In Accordance With The Requirements Of The Abnt Nbr 15.593:2008 Standard; With A Smooth End For Thermofusion/Electrofusion Welding, With A Nut And A Pn16 Flange With Dimensional Standards In Accordance With Nbr 7.675:2005; Supplied With One (01) Set Of Screws, Nuts And Washers (Two For Each Screw) Of Abnt 1020 Or Astm A-307 Carbon Steel, Hot Dip Galvanized, According To Astm A-153 Grade C, Or Aisi Stainless Steel 304, The Diameters Corresponding To The Collar, For Use With Pe 80 Or Pe 100 Polyethylene Pipes, For The Execution Or Maintenance Of Pe 80 Or Pe 100 Polyethylene Pipe Networks, Manufactured In Accordance With Abnt Nbr 15.561:2016 And/Or Standards. Iso 4427. Note: During Receiving Inspection Operations, The Examinations And Tests Provided For In Abnt Nbr 15.593:2008 Must Be Carried Out; It Must Come With A Loose Cast Iron Flange, Fully Coated With Anti-Corrosive, Non-Sticky, Bituminous Enamel, Or With Epoxy Powder Paint, Manufactured In Accordance With The Requirements Of Standard 7.675:2005, Or Carbon Steel Abnt 1020 Or Astm A -307; Manufactured In Accordance With Abnt Nbr 15.561:2016 And/Or Iso 4427 Standards., Size: 160, Size: Dn 160, Dn 160, Pn 16; Polyethylene Pe/Flange Collar, Manufactured In Accordance With The Requirements Of The Abnt Nbr 15.593:2008 Standard; With A Smooth End For Thermofusion/Electrofusion Welding, For Use With Pe 80 Or Pe 100 Polyethylene Pipes; For Execution Or Maintenance Of Polyethylene Pipe Networks Pe 80 Or Pe 100, Galvanized Female/Female Bend 90º 1 - Female/Female Bend 90° Galvanized Malleable Iron Dn 25 (1). 90° Female/Female Bend Made Of Galvanized Malleable Iron, With Internal Threads In Accordance With Nbr Nm Iso 7-1, Manufactured In Accordance With Nbr 6943, For Building Installations., 29/10/2024, Galvanized Female/Female Bend 90º 2 - Female/Female Bend 90° Galvanized Malleable Iron Dn 50 ( 2 ). Malleable Iron 90° Female / Female Bend