Tenders Are Invited For Overhaul And Refurbishment Work - Execution Of Works Within The Investment Objective Consolidation And Energy Efficiency Of The Technological High School Nicolae Titulescu - Stage 1 - Energy Efficiency

Overhaul And Refurbishment Work - Execution Of Works Within The Investment Objective Consolidation And Energy Efficiency Of The Technological High School Nicolae Titulescu - Stage 1 - Energy Efficiency. Proposed Works In Accordance With The Technical Documentation Attached To This Procedure: The Package Of Measures Regarding Energy Efficiency Solutions For Buildings Are Those Specified In The Energy Audit And In The Approval Documentation For Intervention Works: Body C1÷C4 – Audit Prepared For Each Body Of Building By Energy Auditor Engineer Ilioaie Florin George, By Which The Package Of Measures From Option 2 Is Recommended, Which Includes The Following: - Thermal Insulation Of The Facade - The Glazed Part By: Replacing The Existing Exterior Joinery, Including The One Related To The Access To The Building, With Heat-Insulating Joinery With High Performance And The Replacement Of Interior Carpentry (Access Doors And Windows) To Unheated Or Insufficiently Heated Spaces; - Thermal Insulation Of The Facade - The Opaque Part (Including Thermo-Waterproofing Of The Terrace) With 15 Cm Cotton Wool Mattresses On The Outside Of The Building, 10 Cm With Mineral Insulation On The Inside Of The Building (Local Areas In Order To Preserve The Ornaments On The Facade), 10 Cm Extruded Polystyrene On Plinth, Thermal Insulation Of The Floor Above The Last Level With Basalt Wool Mattresses 30 Cm Thick; - Thermal Insulation Of The Floor Above The Basement Or Floor With Thermal Insulation With A Thickness Of 10 Cm; - Installation Of A New Heating And Domestic Hot Water Production System, In Order To Increase Efficiency And Decrease Co2 Emissions. The Heating Elements, The Thermal Agent Distribution System And The Domestic Hot Water Distribution System Will Be Replaced; - Equipping The Building With Recovery Ventilation Systems, With A Minimum Efficiency Of 75% For The Recovery; - Replacement Of Lighting Circuits, Lighting Fixtures, Actuation Devices And Related Electrical Panels; - Installation Of Measuring Equipment For The Electrical And Thermal Energy Consumed By The Building; - Installation Of An Electricity Production System Through Solar Panels; - Installation Of A Thermal Energy Production System For Heating Through A Ground-Water Heat Pump System. Body C5 And C6 – Audit Drawn Up For Each Building Body By Energy Auditor Engineer Ignat Elena, By Which The P3 Package Of Measures Is Recommended, Which Includes The Following: - Thermal Insulation Of The External Walls With A Compact External Thermal Insulation System With Basalt Mineral Wool Panels For The Facade , 10 Cm Thick, Thermal Insulation Of The Plinth With Fireproof Extruded Polystyrene Plates, 10 Cm Thick, Thermal Insulation Of The Terrace With Basalt Mineral Wool 35 Cm Thick, Thermal Insulation Of The Floor On The Ground With Fireproof Expanded Polystyrene Plates 10 Cm Thick; - The Complete Change Of The Existing Carpentry With Energy-Efficient Carpentry; - Modernization Of Systems For The Supply Of Thermal Energy For Heating And A.C.C.; - Modernization Of The Lighting System, Replacing The Existing Fixtures With Fixtures Equipped With Led Type Sources; - Introduction Of Production Equipment