Request For Quotation Outlet Block (Outlet Valve + Flow Sensor) For The Biovent-Biosis Ventilator

Outlet Block (Outlet Valve + Flow Sensor) For The Biovent-Biosis Ventilator. Gost 30528-97. The Exhalation Unit Consists Of An Exhalation Valve And A Flow Sensor. The Flow Sensor Is Required To Measure The Flow And Volume Of Exhaled Air. The Exhalation Valve Is Required To Control Respiratory Phases And Positive End-Expiratory Pressure (Peep). The Flow Sensor And The Exhalation Valve Must Be Compatible With Each Other. Length The Flow Sensor Is 78.6 Mm, The Distance Between The Tubes Is 25.6 Mm. Autoclaving At 121° C Allows You To Use The Exhalation Unit Up To 10 Times If You Follow The Sterilization Instructions. The Flow Sensor Must Be Installed In Such A Way That There Is No Leakage At The Joints With The Exhalation Valve. The Valve The Exhalation Consists Of A Valve Body, A Valve Cover And A Membrane. The Valve Membrane Must Fit Against The Valve Cover In Such A Way That There Is No Leakage. The Valve Cover Must Have An Outlet. After Installing The Exhaust Unit, The System Must Successfully Pass The Device Check. The Warranty Period Of The Exhaust Unit Is 6 (Six) Months. If Manufacturing Defects Are Discovered, The Exhaust Unit Or Its Parts Will Be Replaced With New Ones.) Check With The Customer +7 747 618 6742