Tenders Are Invited For Expansion Of The Psychological And Pedagogical Counseling Center Building By Adding An External Elevator Along With The Necessary Technical Infrastructure And Landscaping At 8 Polna Street

1. The Subject Of The Order Are Construction Works Consisting In The Addition Of An External Elevator At The South-Eastern Façade Of The Building On Plot No. 71/2. The Designed Elevator Shaft - External. Shaft Structure Welded From Closed Steel Profiles Filled With Laminated Safety Glass, Landing Doors Made Of Aluminum Profiles Filled With Laminated Safety Glass - As For The Elevator Shaft - Glass: Euroglas En 356 Or Equivalent. Covered With A Flat Roof Made Of Sheet Metal. Direct Foundation On The Foundation Slab. The Shaft Is Anchored To The Foundation Slab With Glued Or Expanded Anchors. Technical Data: Load Capacity -400 Kg / 5 People, Vertical Speed 0.06 M/S, Power 1.5 Kw, Power Supply -230 Velectric Emergency Descent, Dimensions Of The Driving Platform: 1.1 M X 1.4 M Door Opening - Manual, Own Weight Device Weighing Approx. 1,100 Kg, Internal Ceiling With Lighting, Safety Strip On The Platform, Floor - Anti-Slip Carpet, Hands-Free Alarm Communication System General Description Of The Works: In Order To Enable The Proper Functioning Of The Elevator, Adaptation Works Should Be Carried Out In The Existing Building, Consisting In Replacing The Existing Windows In The Corridors On The Ground Floor And On The First Floor To The Door Leading To The Elevator Shaft. Currently, In The Place Where The Elevator Shaft Is Planned To Be Added, There Are 100 X 140 Cm Windows With Window Sills And Window Recesses In Which Cast Iron Radiators Are Installed. The Modernization Includes: 1) Dismantling Of The Existing Windows In The External Walls Of The Corridors - At The Same Time, It Is Planned To Leave The Lintels Above The Currently Existing Windows, 2) Dismantling Of The Existing Radiator In The Window Recess. Conversion Of Radiator Approaches To The Side Wall, 3) Installation Of A New Radiator On The Side Wall, 4) Disassembly Of The Window Sill And Demolition Of The Wall In The Recess Under The Window - To The Width Of The Designed Elevator Door, 5) Running The Electrical Installation From The Buildings Switchboard To The Elevator Connection, 6 ) Elevator Installation. 2. The Detailed Scope Of The Order Is Determined By The Technical Documentation:• Construction Design (Annex No. 8)• Bill Of Quantities Constituting (Annex No. 9)3. The Contractor Is Obliged To Submit To The Ordering Party For Approval All Working Solutions, Workshop Drawings With Appropriate Descriptions, Calculations, A List Of Materials Planned For Implementation Along With The Necessary Samples Of Materials And The Required Certificates, Approvals, Approvals, Etc.4. The Contractor Is Obliged To Organize And Carry Out The Works In A Safe Manner That Does Not Pose A Threat To People Staying In The Investment Area. In Particular, He Is Responsible For: 1) Securing And Fencing Off The Area Against Access By Third Parties (To Be Done Before The Commencement Of The Works), 2) Organizing And Developing The Construction Site And The Construction Facilities, 3) Maintaining Order During The Exec