Tenders Are Invited For Construction Of A Sports Field In Surowe

Construction Of A Sports Field In Surowe. A Pitch Intended For Playing Tennis And Volleyball With A Playing Field Measuring 23.77 X 11 M. The Dimensions Of The Pitch, Including Runs, Are 31.77 X 15 M. Place Of Order: Voivodeship: Masovian Voivodeship; District: Ostrołęka; Commune: Czarnia; Town: Surowe, Plot 2075, 2076 District: 0009 Surowe. Description Of The Subject Of The Order: The Order Concerns The Implementation Of A Polyurethane Surface - The Proposed Color Is Red Ral 3016. The Final Choice Of The Color Of The Pitch Surface Is The Responsibility Of The Investor At The Implementation Stage With Dimensions Of 32.1 X 20.1 M, With A Playing Field Measuring 28.1 X 15.1 M. A Court Intended For Playing Tennis And Volleyball With A Playing Field Measuring 23.77 X 11 M. The Dimensions Of The Playing Field, Including Runs, Are 31.77 X 15 M. The Playing Fields Are Limited By A Line 10 Cm Thick. White Line For The Tennis Field, Blue Line For The Volleyball Field. The Polyurethane Surface Should Be Adapted To Intensive Use, Resistant To Weather Conditions, With High Anti-Slip Properties And Must Have Certificates. Scope Of Work: - Polyurethane Surfaces 476.55 M2 Sports Surface, Polyurethane- Rubber With A Layer Thickness Of At Least 13 Mm, Water-Permeable, With A Compact Structure. The Surface Must Have The Wa Certificate, The Hygienic Certificate Of The National Institute Of Hygiene And Meet The Requirements Of The Pn-En 14877:2014 Standard. The Surface Consists Of Two Flexible (Load-Bearing) And Functional Layers. The Supporting Layer Is A Mixture Of Rubber Granulate And Polyurethane Binder. It Is Laid Mechanically, Seamlessly, Using A Polyurethane Mass Spreader. The Layer Made In This Way Should Be Covered With A Wear Layer, Which Is A Polyurethane System Mixed With Epdm Granules. This Operation Is Performed By Mechanical Spraying (Using A Special Sprayer). The Thickness Of The Wear Layer Is 2-3Mm. After The Mixture Has Completely Set, The Lines Are Painted With Polyurethane Paints By Spraying. Polyurethane Surface With Structural Spraying, Flexible, Jointless, Water-Permeable, Spike-Resistant, Machine-Installed In Situ (Directly On The Construction Site). Total Surface Thickness Min. 13 Mm. - Subscription Polyurethane Substructure, Flexible, Jointless, Water-Permeable, Machine-Installed In Situ (Directly On The Construction Site). Et Sub-Base Can Replace Concrete Or Asphalt Concrete Sub-Bases. Raw Materials Necessary To Make The Foundation Layer: - One-Component Polyurethane Binder [15.0 Kg/M2] - Sbr Granules 1-4 Mm [14.0 Kg/M2] - Mineral Aggregate 2-5 Mm [2.7 Kg/M2] - Lay The Foundation On A Mineral Layer Substrate. Construction Of The Substructure: Preparation Of The Subfloor - The Subfloor Should Be Thoroughly Tamped Or Vibrated With Special Devices And Prepared In Accordance With The Design. The Substrate Temperature Must Be At Least 3°C ​​Above The Current Dew Point Temperature. Preparation Of The Foundation Layer - In A Special Mixer, Thorou