Tenders Are Invited For Delivery Of Solar Street Lights

Subject Of The Order: 1) Supply Of Solar Street Lamps Consisting Of A Foundation, A Pole, An Led Lamp, A Solar Panel And A Battery. The Foundation Should Be Prefabricated, Reinforced, Typical For The Installation Of Lighting Masts, Impregnated, The Foundation Should Have 4 Mounting Anchors, Included With Polymer Covers. The 5 M High Pole Should Be Made Of Hot-Dip Galvanized Steel, Sheet Thickness Min. 2.5Mm; There Should Be An Inspection Recess In The Lower Part, Approx. 500 Mm Above The Base. Led Lighting Should Have A Power Of Min. 40W; Luminous Flux Min. 8000 Lm; Light Efficiency Min. 200Lm/W; Light Distribution Angle: Road Min. 150O X 70O; Light Color Temperature 5000-6500 K, Natural White; Color Rendering Index Min. 75; Service Life Min. 50,000 Hours, Body Made Of Die-Cast Aluminum. The Photovoltaic Panel Should Meet The Requirements: Minimum Power. 80W/18V; Service Life Min. 30 Years; Adjustment Range 360° Horizontally + 180° Vertically; High Efficiency Solar Controller. The Battery Should Be Lithium-Iron-Phosphate, With A Capacity Of Min. 27 Ah (12.8 V), Service Life Min. 10 Years, Deep Discharge Should Be At Least 2000 Cycles, While Shallow Charging Min. 6000 Cycles. 2) Demand: Kamienna – 5 Sets, Kowalowice – 3 Sets, Ligotka – 5 Sets, Rychnów – 5 Sets, Smogorzów – 6 Sets. The Contractor Will Deliver A Set Of Lamps To Namysłów To The Address Indicated By The Ordering Party. Requirements: The Contractor Will Provide A Warranty For The Subject Of The Order For A Minimum Period Of 24 Months (Maximum 36 Months) From The Date Of Delivery Of The Materials, Committing To Free Removal Of Physical Defects Of The Subject Of The Order If These Defects Are Revealed Within The Indicated Period. The Delivered Materials Must Be Made Of Safe And Durable Materials In Accordance With Polish Standards And Safety Conditions. They Must Have A Certificate Issued By An Accredited Body Or A Declaration Of Conformity Of The Manufacturer Or Supplier, Or An Inspection Report Carried Out By The Manufacturer Or An External Institution (Accredited Laboratory). Notes: 1) All Proper Names Given In The Description Should Be Treated As Defining The Standard Of Devices, Materials And Technical Solutions. The Technical And Operational Parameters Of The Devices Used Should Be At Least Those Given In This Description Of The Subject Of The Order. 2) The Contractor Should Obtain All Information That May Be Useful In Preparing The Offer. The Contractors Claims For Incorrect Price Calculation Or Omission Of Elements Necessary To Perform The Subject Of The Contract Are Excluded. Reasons For Not Dividing The Contract Into Parts: Excessive Technical Difficulties, Excessive Costs Of Contract Execution And Difficulties In Coordinating The Activities Of Various Contractors Implementing Individual Parts Of The Contract, Which Could Seriously Jeopardize The Proper Performance Of The Contract. The Contractor Is Obliged To Complete The Order On The Terms And Conditions Described In The Swz