Tenders Are Invited For Modernization Of The Emergency Evacuation Lighting System, Electrical Installation And Internal Fire Protection Water Supply System In The Building Of The Commune Office In Istebna

The Subject Of The Contract Is The Execution And Acceptance Of Works In The Field Of Electrical Installations Of Emergency Lighting For Escape Routes, Rooms Requiring It, Direction Markings And Fire-Fighting Water Supply And Sewage Installations, Hydrant Installations To Cover The Entire Fire Zone As Part Of The Task Modernization Of Emergency Evacuation Lighting Installations, Electrical Installations And Internal Fire-Fighting Water Supply System In The Building Of The Commune Office In Istebna. This Description Of The Subject Of The Order Is The Design Documentation And Technical Specifications For The Execution And Acceptance Of Construction Works, Which Detail The Task Covered By The Order, In Particular In Terms Of Execution Conditions, Required Construction Methods And Techniques, Use Of Materials And Their Features, Conditions Of Testing, Inspection, Acceptance Of The Building And All Other Technical Conditions. Technical Specifications Are An Integral Part Of Swz. Emergency And Evacuation Lighting Installation1. The Works Covered By The Specification Include All Activities Enabling And Aimed At Installing Emergency And Evacuation Lighting. This Technical Specification Is Related To The Execution Of The Following Works: 1) Installation Of Luminaires In A Total Number Of 42 Pcs; 2) Piercing A Hole In The Walls In The Amount Of 6 Pcs; 3) Forging Grooves For Cables In A Total Quantity Of 120 M; 4) Grouting The Grooves A Total Quantity Of 120 M;5) Two Coats Of Emulsion Paints, A Quantity Of 36 M2;6) Electrical Installation Strips Screwed To Concrete, A Length Of 300 M;7) A Ydy 3X1.5 Mm2 Cable, A Quantity Of 600 M;8) Installation Of Safety Devices In Switchboards; 9) Taking Measurements; 10) Sealing Fire Protection Passages; 11) Commissioning And Checking Correct Operation.2. The Purpose Of Emergency Lighting Is To Provide Lighting To A Specific Zone Immediately, Automatically And For A Sufficient Period Of Time When The Power Supply To The Primary Lighting Fails. The Emergency Evacuation Lighting Installation Should Fulfill The Following Functions: 1) Illuminate Evacuation Route Signs. 2) Produce Lighting Intensity On Evacuation Routes And Along Evacuation Routes In Such A Way That Safe Movement Towards The Exit To A Safe Place Is Possible. 3) Ensure That Rop Points ( Fire Alarm) And Firefighting Equipment Were Placed Along Escape Routes Could Be Easily Located And Used.4) Enable Activities Related To Safety Measures.Internal Hydrant System1. The Works Covered By The Specification Include All Activities Enabling And Aimed At Implementing The Hydrant Installation. This Technical Specification Is Related To The Execution Of The Following Works: 1) Disassembly Works: Disassembly Of Wall Hydrants And A Hydrant Box In The Amount Of 9 Pieces, Dismantling Of A Steel Pipeline Fi 40-50 Mm With A Total Length Of 41.5 M.2) Installation Of A Fire Pumping Station : Insertion Of A Tee With A Diameter Of 63 Mm Made Of Galvanized Cast Iron In The Quantity Of