Tenders Are Invited For Sanitary Works – Renovation Of Middle School

Sanitary Works – Renovation Of Middle School. The Water Is Supplied Via The Public Network Of The Responsible Water Supplier. For The School Building There Is A Peak Volume Flow Of Approx. 1.49 L/S. The Drinking Water Is Only Counted In The Technical Center. The Peak Volume Flow Of The Multi-Purpose Hall At The House Connection With An Installed Individual Outlet Is 2.06 L/S. Hot Water Is Prepared Decentrally Via Suitable Small And Comfort Water Heaters Within The Respective Units. The Cold Water Network Is Largely Distributed On The On-Site Shell Ceiling Or In The Respective Rooms Within The Suspended Ceiling With Stainless Steel Press Pipe. The Distribution Within The Sanitary Units Takes Place Primarily In The Lightweight Walls, But Partly Within The Floor Structure With Multi-Layer Composite Pipe. The Pipes Must Be Provided With Insulation Materials Suitable In Accordance With Geg. The Furnishings Within The Units Must Be Installed In Accordance With The Height Specifications Of Vdi 6000 For The Respective Age Classification Of Schools. Barrier-Free Furnishings Must Be In Accordance With The Specifications Of Din18040 And Personal Ceramic Heights Can Be Found In The Standard Table Specifications. The Installation Of The Disposal Network Within The Building Is Carried Out As A Gravity Drainage System. The Pipe Installation Of The Roof Drainage, As Well As The Additional Emergency Drainage Of The Flat Roof Areas, Inside The Building As Pressure Drainage. The Drainage Is Installed In Push-In Socket Steel Pipes, Socketless, Cast Iron Pipes, As Well As In Highly Sound-Insulated Wastewater Pipes. Drainage Pipe Network: The Pipe Network Is Around 600M Drinking Water Pipe Network: The Pipe Network Is Around 785M Rainwater Pipe Network: The Pipe Network Is Around 280M Floor And Wall Crossings, With Fire Protection Requirements, Are By Means Of Suitable Means And Approved Fire Protection Implementation. The Floor Ceilings Were Largely Designed As Ribbed Ceilings. The Main Entrance, Break Entrance, Or Direct Access To The Existing Heating Center Can Also Be Used To Insert The Technical Components. To Distribute The Components On The Upper Floor, The Staircase Is Centrally Located And Has A Width Of Approx. 1.60 M. The Entrances (Doors) To The Technical And Storage Rooms Have A Width Of At Least 1.01 M And A Height Of 2.00 M.