Tenders Are Invited For Central Heating Installation Work – Renovation Of Middle School

Central Heating Installation Work – Renovation Of Middle School. The Heat Generation For The Building To Be Constructed Is Carried Out By The Local Public Utility Company Using The District Heating Network. The Building Is Equipped With A Transfer Station, Which Also Serves As An Interface For The Installation Work On The Secondary Side. The Buildings Heat Is Distributed Through A Main Distributor With A Total Of Four Supply Outlets, Which Are Divided Into The Static Heating Surfaces Of The Respective Parts Of The Building. The Room Is Heated Using Static Heating Surfaces, In A Hygienic Design As Sectional Radiators, And In The Area Of ​​The Break Areas And Hallways Using Bench Radiators. The Heat Distribution Network Of The Static Heating Surfaces In The Floor Structure Is Installed Using Multi-Layer Composite Pipes. Piping Within The Suspended Ceilings, Visible Areas And Parapet Areas With Pressed Industrial Stainless Steel Pipe. The Heat Distribution Network Of The Respective Distribution Lines Within Classrooms Is Surface-Mounted In The Area Of ​​The Shadow Gap, Below The Parapet Bench. The Pipes Must Be Provided With Insulation Materials Suitable According To Geg. The Water Content Of The Entire Heating Network Is Around 6200 Liters. The Necessary Make-Up, Water Treatment And Safety Components Are Installed In The Technical Center In The Basement. Piping Network: The Pipe Network Of The Static Heating Surfaces Is Around 2700 M With Around 150 Radiators. Floor And Wall Crossings With Fire Protection Requirements Must Be Provided With Suitable And Approved Fire Protection Ducts. The Floor Ceilings Were Largely Designed As Ribbed Ceilings. The Main Entrance, Break Entrance, Or Direct Access To The Existing Heating Center Can Also Be Used To Insert The Technical Components. To Distribute The Components On The Upper Floor, The Staircase Is Centrally Located And Has A Width Of Approx. 1.60 M. The Entrances (Doors) To The Technical And Storage Rooms Have A Width Of At Least 1.01 M And A Height Of 2.00 M.