Bids Are Invited For Hiring Of Company(S) Aiming To Acquire Equipment For The Military Fire Department Of Santa Catarina, Based In The Municipality Of Itá/Sc.

Fire Fighting Hoses 1.1/2 (Cbmsc Standard).Technical Specification No. 388/Cbmschttps://Docs.Google.Com/Document/D/1Uvo7bwdre2wi52n54bkaxiacbf3wxy40/Edit, Fire Fighting Hose 2.1/2 (Cbmsc Standard).Specification Technique No. 389/Cbmschttps://Docs.Google.Com/Document/D/16K-Wzzdeqk_Hie0btyxxy21fq9bailgu/Edit, Portable Equipment For Generating Foam (Cbmsc Standard)Portable Equipment For Generating Foam (Cbmsc Standard).That Allows The User Control Total Over The Flow Rate Proportion And Density Of The Foam Used. The Equipment Must Work With Pressures Of 40 To 500 Psi (3 To 35 Bar) And A Nominal Flow Of 12 Gallons Per Minute Or 45 Liters Per Minute. The Equipment Must Be Completely Dismantled To Facilitate Adequate Cleaning And Maintenance Operations. The Equipment Must Consist Of The Following Parts: Reservoir Tank For Foam Generating Liquid – Reservoir Tank Made Of Engineering Plastic, Resistant To Impacts With A Capacity Of At Least 10 Liters Of Foam Generating Liquid, This Tank Must Have A Large Lid Diameter For Filling And Under Which There Must Be A Protective Screen That Prevents Dirt And Objects From Falling Into The Reservoir. This Lid Must Have A Dial That Indicates The Type Of Foam-Generating Liquid Stored Inside It. The Reservoir Must Be Made In Such A Way That All Equipment Accessories Are Fixed To It, Allowing The Assembly To Be Transported. Instructions For Use And Performance Curves Of The Equipment Must Be Printed Indelibly On One Side For User Guidance. It Must Have A Line Eductor, That Is, A Rod That Will Project Into The Reservoir Over Its Upper Part And Will Capture The Foam-Generating Liquid Through The Fisherman. A Flow Control Valve And A Proportioner Must Be Located On The Same Stem. The Assembly Must Be Fixed To The Reservoir Using Two Through Pins With Locking Rings. The Pins Must Go Through The Eductor Support And The Reservoir Fixing Them. The Foam Proportor Must Have A Dial On The Eductor Stem And On The Flow Control Valve That Will Regulate The Proportion Of Foam Generating Liquid That Will Be Mixed Into The Water. This Regulator Dial Should Allow Dosing Of Foam Generating Liquid..., 1 ½” Nozzle For Fire Fighting (Cbmsc Standard). 1 ½” Nozzle For Fire Fighting (Cbmsc Standard).Technical Specification No. 381/Cbmschttps ://Docs.Google.Com/Document/D/14Conv8wedy2slls398muheld7yylasg1/Edit, 2 ½ Nozzle For Firefighting Technical Specification No. 382/Cbmschttps://Docs.Google.Com/Document/D/1Yb100iei0k4wpcmarsppqhzn6sj-J7le/Edit, 11 /10/2024, Positive Pressure Ventilator (Cbmsc Standard).Technical Specification No. 427/Cbmschttps://Docs.Google.Com/Document/D/1Ultxptwfobedo1chmamxrwh36msfq_-V/Edit, Basket Type Rescue Stretcher With Immobilization Tapes. Technical Specification 345/Cbmschttps://Docs.Google.Com/Document/D/ 1D4db8sxwadwykcjurl4mjq3blfsiqmce/Edit, Stepped Shims, Block And Wedge Shims (Cbmsc Standard).Technical Specification No. 420/Cbmschttps://Docs.Google.Com/Document/D/1Duia7ajv7oj3mjuzhuzvsjqystrvesgb/Edit 1.1/2, Selection Flow 3 0 , 60, 95, 125, 150, 200 Gpm, Working Pressure 100 Psi. (Cbmsc Standard).1.1.Squirt