Request For Quotation Purchase . The Optical Patch Cord Is Intended For Connecting Functional Blocks Of Optical Telecommunication Equipment To Each Other And To Optical Distribution Equipment (Cross)

The Optical Patch Cord Is Intended For Connecting Functional Blocks Of Optical Telecommunication Equipment To Each Other And To Optical Distribution Equipment (Cross). The Lc/Upc-Lc/Upc Optical Patch Cord Is A Segment Of Duplex Optical Cable 1.5 Meters Long And 3 Mm In Outer Diameter, Terminated On Both Sides With Lc Connectors, Upc (Ultra Physical Contact) Polishing Type. The Outer Sheath Of The Optical Cable Is Made Of Lszh (Low Smoke Zero Halogen) Sheath. The Advantage Of Lc-Lc Patch Cords Is The Reliability Of The Detachable Connection And The Low Level Of Direct Losses. 6 Pcs - Lc/Upc-Lc/Upc Duplex. 4 Pcs - Lc/Upc-Sc/Apc Simplex, Utp Cat 5E Patch Panel With Rear Bracket 24 Ports-1U A 24-Port Switching Panel, Necessary For The Consolidation Of Information Cables Of The Storey (Horizontal) Subsystem Of The Sks. Serves For The Convenience Of Switching And Administration Of Scs. The Patch Panel Consists Of 24 Rg 45 Ports On The Front Side And Dual Idc Connectors With A Rear Cable Organizer, Black, Line Thickness: 1-3/0.5 Mm Tip: Bullet-Shaped Color: Black Body Material: Plastic Ink: Light-Resistant, Water-Resistant Description: Double-Sided, Okng(A)-Hf-M4p A24-1.0 Cable For Laying Indoors, Delivered And Constructed, As Well As For Laying Inside Mines (Sheath Made Of Non-Flammable Material) And In Places Where High Fire Safety Requirements Apply. Produced According To Tu 3587-001-92193892-2011 (Declaration Of Conformity No. D-Kb-3612), Intended For Use On The Unified Telecommunications Network And Fiber-Optic Lines Of Kazakhstan For Laying Inside Buildings (Including Vertical Ones), In Cable Trays, Channels And Linings On External Facades Completed., Set Patch Panel 19, 1U For Installation Of Up To 24 Modules/ Standard Rj45 Ports. Designed For Switching Network Cables And Connecting Them To Active Network Equipment Using Rj-45 Patch Cords Compatible With Keystone Jack Plug-In Modules, Clamp-Tie 4.2X250 Black Nylon (6 Pcs) Is Intended For Tying Cables And Wires. The Collar Has An Adjustable Fixing Diameter. Reliable And Simple Installation., Optical Cross 19, 1U, For 24 Lc Ports. In The Set: Pigtail Lc /Upc 1 Meter - 24 Pcs., Lc Dx Adapter - 24 Pcs., Cassette Splice With Cover - 1 Pc., Sleeves 45 Mm - 24 Pcs. Nmf-Rp24lcus2-Ws-1U-Gy Optical Crossovers Equipped With 24 Lc/Upc Ports Are A Ready-Made Solution For Installation In A Switch Cabinet Or A 19 Rack. The Bodies Of The Sneakers Are Made Of Steel And Reliably Protect The Fibers From External Mechanical Influences And The Ingress Of Foreign Objects. The Package Includes Components Necessary For Installation And Welding Of The Cable Inside The Device. For Ease Of Installation And Maintenance, The Installation Depth Of The Cross In A Rack Or Cabinet Can Be Changed. The Simple Design Allows For Convenient And Quick Installation Of Optical Networks., Rj45 Network Cable Tester, The Linear Tester Is Intended For Checking The Power Cable And Telephone Cable Terminated With Rj-45, Rj-12, Rj-11 Connectors (8P8c, 6P6c, 4P4c) And Bnc Type Coaxial Cables. This Device Allows You To Determine A Short Circuit, As Well As The Integrity And Sequence Of The Connection Of The Cable Wires. The Tester Is Easy To Use And Consists Of A Transmitter (Master) And A Receiver (Remote), Which Are Connected To Both Sides Of The Tested Line. After Connecting To The Line, The Tester Begins To Ring The Wires Of The Cable One By One, While The Led Indicators Display Their Integrity And Sequence. Thanks To The Locking Mechanism, The Device Blocks Are Connected To Each Other, Which Greatly Simplifies Their Transportation And Storage., Optical Mini-Box Lc/Upc Sm 4 Port. In The Set: Pigtail Lc /Upc 1 Meter - 4 Pcs., Sleeves 45 Mm - 4 Pcs., Adapter Lc Dx - 4 Pcs. The Small-Sized Optical Wall-Mounted Mini Box Is Equipped With Two Cable Entries. Mini Boxes Can Be Produced With A Bar For Installing Sc/Lc Type Adapters, As Well As For Installing Fc/St Type Adapters. For The Placement Of Welded Joint Protection Kits (Kzds), A Lodgement Is Provided. Optical Ports Are Located On The Adapter Bar. To Protect The Cross, The Door Is Equipped With An Ergonomic Nut-Lamb., Clamp-Tie With Nylon Tag, Clamp With Platform Hp White 2.5X110 (100 Pcs.=1 Pack.) Iek Designed For Quick And Easy Marking Of Cables, Metal Sleeve, Corrugated Sleeve, Etc. Made Of Nylon, Resistant To Organic Solvents, Combustible And Lubricating Materials, Unscreened (Utp) 4-Pair Cable Of Category 6. In Contrast To The Category 5E Cable, It Has A Core Of 0.574 Mm, Which Allows It To Work At A Frequency Of 250 Mhz. In The Center Of The Cable There Is A Separating Channel That Prevents The Pairs From Intertwining With Each Other. Also, According To The Category 6 Standard, Each Pair Has Its Own Twisting Step. The Cable Has A Standard Pvc Sheath And Is Used For Indoor Installation. It Is Used To Create Local Computing Networks (Lans) Of The 1 Gb/S Or 10 Gb/S Standard. There Is A Meter Marking Along The Entire Length Of The Cable. The Color Of The Cable Is Blue, Made Of High-Carbon Steel. Two-Component Handles Are Installed For Ease Of Operation. High-Carbon Steel, Two-Component Handles. The Hinged-Pincer Tool Of The Fine Series Is Intended For A Wide Range Of Locksmith And Assembly Works. The Two-Component Handles Are Made Of Plastic. The Hardness Of The Cutting Edges Is 53 Hrc.1 - Small, 1 - Large, Impact-Type Idc Hammering Tool, Impact-Action Assembly Tool For High-Quality Cable Laying In A Socket Or Block. Blades Made Of Structural Alloy Steel Sae 4140. Body Made Of Impact-Resistant Technical Thermoplastic Resin. Supplied In A Blister Pack. It Is Used For High-Quality Cable Installation In A Socket Or Block. The Length Of The Tool Is 186 Mm (Without Blade)., Cordless Drill-Screwdriver With Adjustable Torque - Intended For Tightening And Loosening Screws, Self-Tapping Screws, Screws And Other Types Of Fasteners, As Well As Drilling Holes, Cable Tie 3.5X 150 Mm Black (Nylon) 100 Pcs. Intended For Bundling Cables And Wires. The Collar Has An Adjustable Fixing Diameter. Reliable And Simple Installation., Self-Adhesive Thermal Label 40X70 (1000 Labels Per Roll) For Electronic Scales And Bar Coding Made Of High-Quality Thermosensitive Paper, Unscreened (Utp) 4-Pair Cable Of Category 5E It Has A Standard Pvc Cover, Which Is Used When Laying Indoors. It Is Used To Create Local Computing Networks (Lans), Standard 100 Megabits/Sec. The Color Of The Cable Is Green, Horizontal Cable Organizer 19 1U For Convenient Placement Of The Switching Cable.. 6 Rings. It Is Made Of An All-Metal Panel With A Height Of 1U. Snr-Fb-Org Is A Horizontal Cable Organizer With A Height Of 1U, Intended For Installation In 19-Inch Cabinets/Racks. This Organizer Consists Of A Base Made Of Steel With A Thickness Of 1.0 Mm And Four Plastic Rings., Technical Hair Dryer - Intended For Hot Air Treatment Of Surfaces And Materials, For Removing Paints, Molding And Welding Plastics, Heating Heat Shrinkable Pipes. The Tool Is Also Suitable For Soldering And Tinning, Softening Adhesive Joints, As Well As Defrosting Water Pipes, They Are Intended For Terminating Both Horizontal (Solid) Cable And Patch Cord (Stranded) Cable. To Facilitate The Process Of Laying Out Conductors And Monitoring Their Location, It Is Equipped With A Special Insert. After Laying The Conductors In Their Places And Trimming The Excess Wires From The End Part, The Insert Is Inserted Into The Connector Body As Far As It Will Go. Then The Connector Is Crimped Using Crimping Pliers. Connectors Meet The Requirements Of Category 6 Utp (Unshielded) Have 8 Contacts. The Screen Is Made Of Nickel-Plated Copper. Together With The S901e Connectors, It Is Recommended To Use Protective Caps To Ensure The Correct Bending Radii Of The Appropriate Cable.