Bids Are Invited For Acquisition Of Metal Reservoirs

Metallic Reservoir, With The Following Minimum Characteristics:- Minimum Capacity Of 100,000 Liters;- Diameter Of 3.18 Meters;- Height Of 12.19 Meters;- Handrail On The Ceiling 1.20 In Height;- Internal Staircase;- External Staircase With Guardrail;- Inspection Mouth On The Ceiling;- Vent On The Ceiling;- Piping Support On The Side Of The Reservoir;- Inlet, Outlet, Drain And Thief;- Lightning Arrester Supports;- Pilot Light Support; E- Aluminum Identification Plate.Databook:- Certificate Of Potability, Certificates Of Quality Of The Raw Material Used In The Manufacturing Of The Tank;- Certificate With Qualification Of Welders + Evs Welding Test And Penetrating Liquid, Certificate With Adhesion Test And Paint Micron ;- Executive Project For The Base Foundation (Within 10 Days Of Signing The Contract); E- Executive Hydraulic Project (Within 10 Days After Signing The Contract).Warranty:- Painting 02 (Two) Years; E- Structural 05 (Five) Years.Materials:- Based On Structural Engineering Calculation, With Astm A-36 Steel.Welding Procedures:- Internal And External Following Technical Standards Aws A 5.18 And Aws A 5.1.Preparation Of Plate Surface: - Internally And Externally Carried Out With Almost White Metal Blasting In Sa 2.1/2 Standard, In Accordance With Nbr 7348; E- Made With A Base (Internal And External) Bi-Component Iron Oxide Primer In Pool Blue, Gray Or White With Two Coats Totaling 50 Microns. Of The Internal Painting:- Finished In Swimming Pool Blue With Two Coats Totaling 120 Final Microns, In Polyamide Epoxy Primer (Non-Toxic), In Accordance With Potability Certificate And In Accordance With The Ansi/Nf61 Standard. Of The External Painting:- Finished (In Two Coats) Totaling 100 Final Microns, In White. Installation And Transport Included.