Tenders Are Invited For Engineering - Design, Implementation Of Maintenance And Exercise Of Author Supervision Within The Framework Of Investment Bg - Rrp - 4.020-0284-C01 Energy Renovation Of The Building Of The Nikola Petrov Sports Hall - Gorna Oriahovitsa

Brief Description / Documentation The Nikola Petrov Sports Hall Building Is Public Municipal Property, According To Act No. 5349/03.12.2018. It Consists Of Two Above-Ground Floors. The Structural System Of The Building Is Mixed - Monolithic Reinforced Concrete, Roofs - From Prefabricated Reinforced Concrete Panels Above The Sports Halls And A Monolithic Reinforced Concrete Slab Above The Administration, The Structural Scheme Is Skeletal - Beam. The Roofs Are Pitched, Covered With Lt Sheet Metal. The Facade Walls Are Made Of Brickwork With Applied Plaster. The Drainage Of The Roof Is External By Means Of Gutter Pipes Made Of Galvanized Sheet Metal, Which Descend Along The Facades, Taking The Rainwater From The Roof Directly Onto The Adjacent Terrain Around The Building. The Majority Of The Facade Joinery Is Wooden And Metal, Morally Outdated, With Poorly Insulating Roofs. It Has Partially Replaced Windows. The Building Is Heated By A Heating Installation Consisting Of A Pipe Network And Heating Elements. The Heat Carrier Is Steam And Is Provided By A Local Boiler Installation Located In A Separate Room On The Ground Floor Of The Building. The Boiler Installation Is Supplied With Fuel - Methane Gas From The Citys Gas Transmission Network Through The Gmrt Installed In The Yard. The Lighting Installation - The Lighting Lines Are Completed With A Lv 3X1mm2 Wire Laid In Installation Pvc Channels Or Hidden Under Plaster. The Lighting Fixtures In The Offices Are Fluorescent Fixtures. Evacuation Lighting Fixtures Have Fluorescent Lamps And Built-In Rechargeable Batteries And Turn On Automatically When The Main Power Supply Is Turned Off. The Buildings Lightning Protection Is An Old Conventional Lightning Protection Installation With A Lightning Network Of Wire Almgsi0.5 With A Diameter Of Φ8mm Laid On The Roof. 1.3 All Construction And Assembly Works Must Be In Strict Accordance With The Current Regulations, The Approved Projects And The Standards And Specifications Cited In The Projects. When Implementing The Smr, The Contractor Must Strictly Adhere To The Current Normative Acts In The Field Of Construction, To The Requirements Of The Contracting Authority Specified In The Relevant Technical Specification, In The Annexes To The Documentation For The Public Procurement, Including The Proposals In His Offer And The Annexes To It .