Bids Are Invited For Paving In Hexagonal Blocks With Curbs And Gutters And Construction Of A Retaining Wall, On Avenida Bolivar Tameirão, Rua José Raimundo Teixeira And Rua Edite Pena, In The Rodeador District And Local Roads In The District Of São José Dos Altos - Monjolos/Mg

1.1-Supply And Placement Of Work Sign In Galvanized Sheet #26, Esp. 0.45Mm, Dimension (3X1.5)M, Plotted With Vinyl Adhesive, Affixed With 4.8X40mm Rivets, On 20X20mm Metal Structure, Special. 1, 25Mm, Including Support In Autoclaved Eucalyptus Painted With Pva Paint Two (2) Coats., 2.1-Manual Removal Of Polyhedral Masonry, With Reuse, Including Removal And Stacking, Exclusive Transport And Removal Of Non-Reusable Removed Material, 2.2-Manual Demolition Of Gutter Or Concrete Gutter, Excluding Transport And Removal Of Demolished Material, 2.3-Manual Removal Of Precast Concrete Curb Guide, Including Spacing And Stacking, 3.1-Manual Excavation Of Trench With A Depth Of Less Than Or Equal To 1.5M, Including Lateral Discharge, 10/09/2024, 3.2-Preparation Of Trench Bottom Width Less Than 1.5 M (Natural Soil Adjustment). Af_08/2020, 3.3-Lean Concrete Ballast, Applied To Crowning Blocks Or Footings, 3 Cm Thick. Af_08/2017, 3.4-Cyclopean Concrete, Fck 15Mpa, Prepared On Site With A Concrete Mixer, With The Addition Of 30% Of Hand Stone, Including Placing, Densification And Finishing, 4.1-Assembly And Disassembly Of Rectangular Pillar Formwork And Similar Structures, Foot -Simple Law, In Sawn Wood, 4 Uses. Af_09/2020, 4.2-Cutting And Bending Of Ca-60 Steel, Diameter Of 5.0 Mm. Af_06/2022, 4.3-Cutting And Bending Of Ca-50 Steel, Diameter Of 10, 4.4-Concreting Of Pillars, Fck = 25 Mpa, Using Buckets - Laying, Thinning And Finishing. Af_02/2022, 5.1-Assembly And Disassembly Of Beam Formwork, Shoring With Wooden Spike, 5.2-Cutting And Bending Of Ca-60 Steel, 5.3-Cutting And Bending Of Ca-50 Steel, Diameter Of 8, 5.4-Concreting Of Beams And Slabs, Fck=25 Mpa, For Solid Or Ribbed Slabs Using A Pump - Laying, Thickening And Finishing. Af_02/2022_Ps, 6.1-Lean Concrete Ballast, 6.2-Filled Concrete Block Masonry Without Frame, In Concrete With Fck Of 20Mpa, Esp. 19Cm, For Coating, Including Mortar For Laying (Detail D - Seds Notebook), 7.1-Painting With Asphalt Emulsion, Two (2) Coats (Internal Side), 7.2-Scooting With Mortar, 1:3 (Cement And Sand), Esp. 5Mm, Applied To Masonry/Concrete Structures With A Trowel, Including Mortar With Mechanized Preparation, 7.3-Plastering With Mortar, Mix 1:2:8 (Cement, Lime And Sand), Esp. 20Mm, Manual Application, Exclusive Chapisco, 7.4-Preparation For Plastering Or Painting (Latex/Acrylic) On Wall, Including One (1) Coat Of Acrylic Sealer (First Line), 7.5-Latex (Pva) Paint On Wall, Two (2 ) Coats, Exclusive Acrylic Sealer And Acrylic/Running Putty (Pva) (First Line), 8.1-Manual Trench Backfilling, With Percussion Soil Compactor. Af_08/2023, 9.1-Determination And Analysis Of Compression Resistance Result Of Molded Concrete, 10.1-Transportation With 10 M³ Dump Truck, On Urban Road In Natural Bed (Unit: M3xkm). Af_07/2020, 10.2-Execution Of Flooring On Interlocking Floor, With Hexagonal Block Of 25 X 25 Cm, Thickness 8 Cm. Af_12/2015, 10.3-Laying Of Guide (Curb) In Straight Section, Made Of Prefabricated Concrete, Dimensions 80X08x08x25 Cm (Length Af_06/2016 (Locking), 11.1-Setting Of Guide (Curb) In Straight Section, Dimensions 100X15x13x30 Cm (Length X Lower Base X Upper Base X Height), For Urban Roads (Road Use). Af_06/2016, 11.2-Settlement Of