Tenders Are Invited For Road Construction Works – Design, Technical Assistance And Execution Of Works: Increasing Accessibility And Connectivity To The Ten-T Road Network Of County Roads Dj 119D, Dn 2-Valea Seacă-Cucova-Orbeni-Drăgușani-Parava (Intersection With Dj 206B); Dj 206 B (Intersection With Dj 119D)-Parava And Rădoaia-Dumbrava (Intersection With Dj 119); Dj 119-Dumbrava (Intersection With Dj 206B)-Temelia-Gura Văii-Onești (Dn 11 A) Bacău County

Road Construction Works – Design, Technical Assistance And Execution Of Works: Increasing Accessibility And Connectivity To The Ten-T Road Network Of County Roads Dj 119D, Dn 2-Valea Seacă-Cucova-Orbeni-Drăgușani-Parava (Intersection With Dj 206B); Dj 206 B (Intersection With Dj 119D)-Parava And Rădoaia-Dumbrava (Intersection With Dj 119); Dj 119-Dumbrava (Intersection With Dj 206B)-Temelia-Gura Văii-Onești (Dn 11 A) Bacău County. Stage I (Design): This Stage Includes The Elaboration Of The Following Documentation: - Elaboration Of The Technical Documentation For Obtaining The Necessary Approvals/Agreements For Obtaining The Building Permit; - Elaboration Of Technical Documentation For Obtaining The Building Permit (Dtac); - Elaboration Of The Work Execution Organization Project (P.O.E.) - Elaboration Of The Technical Execution Project, (Pte + De + Specifications For Specialties, Pre-Measurements And Lists With Quantities Of Works); Important: All The Above Services Must Be Done With Mandatory Compliance With The Dnsh (Do No Significant Harm) Requirement, As Stipulated In Article 17 Of Regulation (Eu) 2020/852 Regarding The Establishment Of A Framework To Facilitate Sustainable Investments Note: - The Documentation Requested Within The Design Services Are Provided As Mandatory Both Within The Urban Planning Certificate And According To The Provisions Of Hg907/2016, Law No. 50/1991 And Law No. 10/1995. - Obtaining The Building Permit Is Not The Responsibility Of The Bidder. Stage Ii (Execution Of Works) Execution Of Works To Achieve The Investment Objective, In Accordance With The Provisions Of The Technical Project Developed In Stage 1, Technical Prescriptions, Standards In Force. For The Road Sector Dj 119 D, Dn 2 - Valea Seaca - Cucova - Orbeni-Dragusani - Parava (Connected With Dj 206B) In Length Of 14.639 Km Road Works: - Land Development; - Arrangement For Environmental Protection; - Construction Of The Road Platform; - Road Structure Development Includes Road Structure Reinforcement With Two Or Three Layers Of Bituminous Mixtures - In Accordance With The Recommendations Of The Technical Expertise With The Following Applicability: * Km 0+000 – 3+600 And Km 11+490 – 14+592 Road Structure Reinforcement With Two Layers Of Bituminous Mixtures (The Connecting Layer Of Badpc22.4 Leg 50/70 With A Minimum Thickness Of 6 Cm, To Which Is Added An Average + 3 Cm Re-Profiling Layer Of The Support Layer, After Milling The Unevenness And Grooves, The Wear Layer Of Ba16 Roll 50/70 In A Thickness Of 4 Cm) *Km 3+600 – 11+490 Road Structure Reinforcement With Two Or Three Layers Of Bituminous Mixtures (The Base Layer Of Abpc22,4 Base 50/70 With A Minimum Thickness Of 8 Cm, To Which Is Added An Average + 3 Cm Re-Profiling Layer Of The Support Layer, After Milling The Bumps And Grooves, The Connecting Layer Of Badpc22.4 Leg 50/70 With A Minimum Thickness Of 6 Cm, The Wear Layer Of Ba16 Rul 50/70 With A Thickness Of 4 Cm) - Water Collection Works; - Pavement Works; - Development Of Side Roads; - Arrangement Of Sidewalks; - Arrangement Of Parking Areas; - Consolidation Works; - Traffic Safety Works; - Electric Charging Stations Include Procurement And Installation. Bridge Works Bridge Km 2+446 (2+446), Over The Valea Seaca River - Construction Of A New Bridge; Bridge Km 4+420(4+430), Over The Cucova River - Bridge Rehabilitation Works; Bridge Km 6+486(6+486), Over The Scurta River