Bids Are Invited For Acquisition Of Electrical Material For The Implementation Of A Lighting System At The Alfredo Leandro Carlson Exhibition Park. Protocol Nº 64504/2024.

Aluminum Head For Galvanized Conduit Ø 4., Gtdu 5/8 Connector With 2 Screws, 90° Bend In Galvanized Steel, Section Ø 4, For Conduit., Inversion Curve, Produced In Carbon Steel, Hot Dip Galvanized, For Perforated Electrical Trunk With Dimensions Of 150X50mm., Horizontal Curve 90°, Made Of Carbon Steel, Hot Galvanized, 04/10/2024, Thermomagnetic Three-Pole Circuit Breaker, In Molded Case, 800V Insulation, Nominal Voltage 400Vac, Nominal Current 225A, Short Interruption Capacity 20Ka Circuit (400Vac), According To Iec 60947-2., Nominal Current 63A, Short Circuit Interrupting Capacity Of 15Ka (400Vac), Galvanized Conduit (Semi Heavy), Ø 100Mm (4), According To Nbr 5598., Telescopic Splice , Heat Shrink Spaghetti For Insulation 2.5Mm., High Insulation Self-Fusion Tape For Cable Splices And Terminations, 69Kv, For Operating Temperatures Of Up To 90°C, Supplied In A Roll With A Width Of 19Mm And A Length Of 10 Meters. 5 Year Warranty, Insulating Tape, 20 Meters White Color, 2O Meters Red Color, Insulating Tape Blue Color, 20Mm 50/60Hz., Led Public Luminaire, Nominal Power 113W, Luminous Flux 20200Lm, 4000K, Pmsr Standard - Led 4. Roadforce Medium Model - Brp483 Led202 Nw 113W Dml P7 0-10, Manufacturer Philips., 2P+T Male Plug, 10A , 250V, Black., Double Curved Continuous Conical Steel Post, Flanged, H = 11 M, Diameter At The Top = 60, 3 Mm, Output Angle Of 10°, Horizontal Projection Of 2500Mm, With Inspection Window 600Mm From The Ground , Fire Zinc Finish. Produced In Compliance With Nbr 6123 And Nbr 6323, Supplied With Anchors., Universal Pliers For Insulated Electrician For 1000V, Vanadium Steel Body With Nickel-Plated And Chrome Finish, Flame-Resistant, Ergonomic And Non-Slip Polymer Handle, With Rounded Protective Tabs, Produced By Injection Providing Insulation Up To 1000 V, According To Standard Nbr 9699, Subjected To Impact, Electrical Voltage, Adhesion, Flammability And Pressure/Penetration Tests, Must Safely Meet Regulatory Standard Nr 10, And Have An Insulation Certificate., Insulated Straight Nose Telephone Pliers For 1000V, Vanadium Steel Nickel-Plated, Chromed And Polished Finish, Produced By Immersion Providing Insulation Up To 1000 V, According To Standard En 60900 / Iec 60900, Insulated Swedish Model Diagonal Cutting Pliers For 1000V, Vanadium Steel Body, Darkened Finish And Sanded Faces, Digital Clamp Meter, With The Following Features: Lcd Display 3 ¾ Digits, 4000 Counts; Display And Clamp Lighting; Sampling Rate Approx. 3 Times/Second; Automatic Polarity Indication; Overrange Indication; Low Battery Indication; Automatic/Manual Lane Change; Data Hold; Relative Mode; Auto Power Off Approx. 30 Minutes; Claw Opening 30Mm; Operating Temperature 0°C To 40°C; Safety/Compliance With Iec/En 61010-1, Double Insulated, Cat Iii 600V; Power: 3 1.5V Aaa Batteries; Dimensions: 228(H) X 77(W) X 41(D)Mm; Weight: Approx. 265G (Including Battery); Must Enable Measurements Of Dc Voltage (400Mv ~ 600V), Ac (4V ~ 600V), Ac Current (4A ~ 400A), Resistance (400 ~ 40M), Capacitance (50Nf ~ 100F), Frequency (10Hz ~ 1Mhz), Duty Cycle , Diode And Continuity Tests, Data Hold, Relative Mode And Non-Contact Voltage Detection (Ncv); Warranty: 12 (Twelve) Months From Date Of Purchase: Supplied With Instruction Manual And Tips