Bids Are Invited For Acquisition Of Hospital Equipment, Furniture And Medical Devices For The Cornélio Procópio Regional Hospital, Through Agreement No. 133/2021 With Sesa.

Transport Lung Ventilator - Transport Ventilatorequipment Used To Transport Patients With Respiratory Failure, With The Function Of Pumping Air Enriched With Oxygen Into The Lungs;- Allow The Use Of Adult And Pediatric Patients;- Microprocessed With Its Own Generator Compressed Air, With Sensitivity To Flow Or Pressure; - Invasive And Non-Invasive Positive Pressure (With Leaks Compensation);- Maximum Weight 7Kg, Aiming To Facilitate Transport Logistics;- Screen With Minimum Size Of 6 Inches, Colored Which Presents Trend Curves — Pressure X Time, Flow X Time And Volume Visual And Audible Alarm Indication;- Operation With Double Branch Circuit;- Must Have Expiratory Valve System With Built-In Flow Sensor;- Adjustment Ranges Of Ventilatory Parameters (Minimum Range): Respiratory Rate: 4 To 80 Rpm; Tidal Volume : 20 To 2200Ml;Inspiratory Time: 0.1 To 10S;O2 Concentration: 40 To 100%;Peep: 0 To 30 Cmh2o;Inspiratory Pressure: 5 To 60 Cmh2o;Ratio: 1:4 To 4:1- Temporary Silencer Alarms Via Key On The Front Panel;- Minimum Ventilation Modes: Volume Controlled Ventilation, Pressure Controlled Ventilation, Time Cycled Limited Pressure Ventilation, Volume Controlled Synchronized Intermittent Mandatory Ventilation With Pressure Support, Pressure Synchronized Intermittent Mandatory Ventilation Controlled With Pressure Support And Continuous Positive Pressure Ventilation With Pressure Support;- Storage Of Ventilatory Parameters When Disconnecting Or Discharging The Patient, Avoiding The Loss Of Previously Adjusted Parameters With The Option To Keep Them Updated;- Standby Mode Or Stand By Se, Contrast Injection Pump - Injection Pump - Two-Head Contrast Injection Pump. - Each Injection Head Must Have A Usage Capacity That Meets The Range Of 75 To 125 Ml, At Minimum. - It Must Have A Digital Display Indicating The Basic Injection Parameters And An Overflow Detection System. - It Must Allow Flow Adjustment In The Range Of 0.3 To 9.9 Ml/S (Minimum); 50 To 300Psi;-You Must Have A Program To Store Single Or Multiple Injection Protocols; - It Should Allow Selection Of Injection Volume Or Injection Duration; - Simultaneous Injection Proportion From 10% To 70% (At Minimum); Count On The Possibility Of Injecting In Phases (Stages); - Rotation Capacity Of The Injection Support Of At Least 320 Degrees; - It Must Have A Syringe Heater That Maintains The Temperature Of The Contrast (Preheated) At Body Temperature; - Supply Voltage 100-240V Ac (Automatic Bivolt), 50-60Hz, Via Power Cable; In The Case Of A Distributor, Present The Letter Of Authorization, Which Must Be On The Manufacturers Letterhead. Warranty: − Minimum Warranty Statement Of 24 (Twenty-Four) Months From Equipment Installation. - The Supplier Must Guarantee The Availability Of Replacement Parts On The Market, For At Least 5 Years After Installation