Tenders Are Invited For Tanker Trailers – Delivery Of A Brand New Slurry Trailer.

Tanker Trailers – Delivery Of A Brand New Slurry Trailer.. The Subject Of The Order Is The Delivery Of A Brand New Slurry Trailer. Year Of Production 2024. The Device Cannot Be A Prototype And Must Meet The Standards And Legal Regulations Applicable In Poland. The Vehicle Must Be Free From Design, Material, Workmanship And Legal Defects. 2. Technical Parameters Of The Slurry Tanker: 2.1. Brand New. 2.2. Capacity: Min. 28 M3. 2.3. Stainless Steel Tank Reinforced With External Rings. 2.4. The Jacket Of The Waste Tank Is Made Of Sheet Metal With A Thickness Of At Least 3 Mm. 2.5. The Reservoir Is Equipped With An Appropriate Number Of Breakwaters In Accordance With Applicable Regulations. 2.6. Waste Tank Painted Outside In Ral 6018. 2.7. Tank Equipped With Min. 3 Internal Compartments. 2.8. Upper Inspection Hatch Min. 1. 2.9. A Platform With A Foldable Barrier Or A Ladder To Operate The Upper Manholes. 2/10. Waste Discharge Trough Made Of Aluminum Or Unpainted Stainless Steel Under The Rear Bottom With Appropriately Large Shapes To Prevent Contamination When Emptying The Tank. 2/11. Hose Gutters Made Of 3 Mm Thick Aluminum Sheet With Drain Valves Or Round, Closed Cable Compartments Made Of Plastic. 2/12. Compressor With Hydraulic Drive For Continuous Operation, Air Or Liquid Cooled, Equipped With An Overpressure And Underpressure Valve. 2/13. Compressor With A Capacity Of Min. 920 M3/H. 2/14. Suction Depth Min. 6 M From Road Level. 2.15. Led Work Light In The Rear Part Of The Body, Covered With A Protective Basket, Illuminating The Work Area Behind The Vehicle. 2.16. Led Warning Light At The Rear Of The Body With A Protective Basket. 2.17. The Bottom Opens Hydraulically, The Actuators Are Equipped With Hydraulic Locks To Prevent Gravity Closing In The Event Of A Hydraulic System Failure. 2.18. Shut-Off Valve To Prevent Overflow. 2.19. Lubricating Oil Catcher. 2.20. Noise Silencer. 2.21. Barrel Operation By One Person – Ergonomic. 2.22. Power Transmission From The Tractor Hydraulics. 2.23. The Control Panel Is Located At The Rear Of The Vehicle, In A Stainless, Tight, Lockable Housing Resistant To Adverse Weather Conditions. 2.24. Possibility Of Emptying The Barrel By Gravity. 2.25. The Slurry Tank Should Meet The Requirements Specified In The Regulation Of The Minister Of Infrastructure Of November 12, 2002 On The Requirements For Slurry Vehicles (Journal Of Laws No. 193, Item 1617).