Bids Are Invited For Disposal Of 12 Lots Of Assets Considered Unusable.

Table, Type/Model: Premem Adult, Feature: Premem Type Book Holder, Fixed To The Structure And The Internal Distance Between The Support Crossbars Of The Top And The Book Holder Must Be 13 Cm, Top: Hardwood Plywood, Thickness Of Tops: 20 Mm, Structure [Cm]: 60 X 40 X 71, Steel Structure: In Industrial Steel Plate 18 [30 Layer Min. 40M Treats. Phosfatie, Fixing: To The Structure Using 04 Screws With A Superb Thread On The Lower Part Of The Top At Its Fixing Points, Top Cover: White Glossy Formica, Book Holder: Plywood, Book Holder [Cm]: 54 X 13, Tip: Plastic On The Feet, The Welding Of The Structure Pieces Must Be Continuous On 2 Sides Of Each Piece Without Showing Burrs, Measurements [Cm]: 54 Material]: Industrial Steel Plate 18 [30 Type: Premem Children, Structure [Cm]: 60 X 40 X 66, Book Holder [Cm]: 43 Table Measuring 660, 0Mm Wide On The Front Part, With Pencil Holder In Horizontal Position, Fixed To The Structure Using 04 Invisible Self-Tapping Screws, Injected In Abs Thermoplastic Resin, Front Edge Measuring 20Mm And Front Edge Measuring 65Mm, Top To Floor Height 590 Mmm. Under Top Made Of High Impact Thermoplastic Resin, Closed On The Back And Sides With Ventilation Holes, Measuring 450.0 Mm X 85.0Mm, 330Mm Deep. Top Base Formed By 01 Oblong Tube Measuring 16Mm 2Mm. Base Of The Feet In Oblong Tubes Measuring 20Mm X 48Mm With A Thickness Of 1.5Mm In The Shape Of An Arc With A Radius Measuring A Maximum Of 800.0Mm. An Oblong Under Top Support Bar Of 16Mm X 30Mm With 1.2Mm Thickness Fixed Between The Columns. Polypropylene Backpack Support. Non-Slip Shoes And Also With Paint Protection Function In An Oblong Shape Accompanying The Feet, Measuring Approximately 55Mm Color Of The Top And Fixed To The Structure Using Galvanized Rivets. Chairs: With Seat And Back In Plastic Resin, Manufactured Using The Thermoplastic Injection Process, Fixed Using Invisible Self-Tapping Screws. Seat Measuring 395Mm X 410Mm, Seat/Floor Height 450Mm. Backrest With Anatomical Curvature Measuring 410Mm X 245Mm With 02 Ventilation Holes. Minimum Thickness 5Mm. Structure Formed By Two Pairs Of Oblong Tube Measuring 20Mm X 48Mm With A Thickness Of 1.2Mm. Seat Base And Interconnection To The Back In 20Mm X 20Mm Square Tube With Ergonomic Curvature For Accommodation, Two Horizontal Bars For Support Under The Seat In 5/8 Tube. One Horizo ​​Bar, Type/Model: Cja - 06, Complement: Cja-06 – Table A] Top In Mdp Or Mdf, With A Thickness Of 18 Mm, Covered On The Upper Face In High Pressure Melamine Laminate, 0.8 Mm Thick, Textured Finish, In Color